Sintering characteristics of environmentally friendly porous ceramics prepared by self-sintering of desert sand

被引:5
作者
Wang, Wenbin [1 ]
Wang, Zidong [1 ]
Wang, Shigang [1 ]
Shi, Zhiming [1 ]
机构
[1] Inner Mongolia Univ Technol, Sch Mat Sci & Engn, Hohhot 010051, Peoples R China
关键词
Ceramics; Microstructure; Phase transformation; Porous materials; Sintering; PHASE-TRANSFORMATION; QUARTZ;
D O I
10.1016/j.matlet.2022.132694
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Natural desert sand has particle shapes and a relatively high content of silica and other useful chemical compositions. Porous quartz ceramics were prepared by self-sintering of three kinds of screened desert sands, and the composition, particle size, phase transformation, microstructure and properties of the ceramics were investigated. Experimental results showed that the particle size of desert sand was dominant in sintering of ceramics and the gradation changed the ratio of silica to feldspar phases, which was increased with an increase in particle size. The low-melting feldspar phases were primary to generate self-sinterability. The obtained ceramics with open, open-closed and closed pores can be prepared from large, medium and small sand particles, respectively.
引用
收藏
页数:5
相关论文
共 50 条
[41]   Dense SiC ceramics prepared by using amorphous sintering additives [J].
Liu, Yang ;
Yuan, Jin-Hao ;
Tian, Hou-Liang ;
Guo, Wei-Ming ;
Sun, Shi-Kuan ;
Duan, Xiao-Ming ;
Jia, De-Chang ;
Lin, Hua-Tay .
CERAMICS INTERNATIONAL, 2022, 48 (11) :16449-16454
[42]   Sintering and mechanical properties of alumina ceramics prepared by nanosize alumina [J].
Indra ;
Oh, S. W. ;
Kim, H. J. .
ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 :821-+
[43]   Sintering and characterization of in situ formed porous cordierite ceramics with nano boehmite additions [J].
Mansour, T. S. ;
Wahsh, M. M. S. ;
Othman, A. G. M. .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (05) :2727-2736
[44]   Zero sintering-induced shrinkage of porous oxide ceramics [J].
Miao, Kai ;
Liu, Liangjie ;
Cao, Jiwei ;
He, Ran ;
Li, Sai ;
Wu, Lingling ;
Lu, Zhongliang ;
Li, Dichen .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2023, 159 :184-193
[45]   Synthesis, sintering and thermal expansion of porous low expansion ceramics [J].
Maschio, S ;
Bachiorrini, A ;
Lucchini, E ;
Brückner, S .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (13) :3535-3540
[46]   Microstructure, phase transformation and mechanical property of porous NiMnGa alloys prepared by one-step sintering [J].
Gao, Ping ;
Tian, Bing ;
Xu, Jilin ;
Tong, Yunxiang ;
Li, Li .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788
[47]   Effect of sintering aids on microstructure and properties of textured SiC ceramics prepared in 6 T [J].
Yang, Zhigang ;
Yin, Ziqiang ;
Zhao, Zhijia ;
Yu, Jianbo ;
Ren, Zhongming ;
Yu, Gang ;
Zhang, Guanglei .
JOURNAL OF ASIAN CERAMIC SOCIETIES, 2021, 9 (01) :62-72
[48]   Microstructure and Properties of Porous Titanium Prepared by Spark Plasma Sintering [J].
Liu, Shifeng ;
Zhang, Guangxi ;
Shi, Mingjun ;
Yang, Xin ;
Li, An .
METALS, 2019, 9 (01)
[49]   Quantitative Phase Analysis and Crystal Structure of DyBCO Ceramics Prepared at Different Sintering Conditions [J].
Boonsong, Paitoon ;
Wannasut, Pimpilai ;
Rachakom, Ampika ;
Watcharapasorn, Anucha .
CHIANG MAI JOURNAL OF SCIENCE, 2018, 45 (04) :1835-1842
[50]   Pressureless sintering of in-situ toughened Yb α-SiAlON ceramics by adding seed crystals prepared by combustion synthesis [J].
Guanghua Liu ;
Kexin Chen ;
Heping Zhou ;
Xiaoshan Ning ;
C. Pereira ;
J. M. F. Ferreira .
Journal of Materials Science, 2006, 41 :1791-1796