Sintering characteristics of environmentally friendly porous ceramics prepared by self-sintering of desert sand

被引:3
作者
Wang, Wenbin [1 ]
Wang, Zidong [1 ]
Wang, Shigang [1 ]
Shi, Zhiming [1 ]
机构
[1] Inner Mongolia Univ Technol, Sch Mat Sci & Engn, Hohhot 010051, Peoples R China
关键词
Ceramics; Microstructure; Phase transformation; Porous materials; Sintering; PHASE-TRANSFORMATION; QUARTZ;
D O I
10.1016/j.matlet.2022.132694
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Natural desert sand has particle shapes and a relatively high content of silica and other useful chemical compositions. Porous quartz ceramics were prepared by self-sintering of three kinds of screened desert sands, and the composition, particle size, phase transformation, microstructure and properties of the ceramics were investigated. Experimental results showed that the particle size of desert sand was dominant in sintering of ceramics and the gradation changed the ratio of silica to feldspar phases, which was increased with an increase in particle size. The low-melting feldspar phases were primary to generate self-sinterability. The obtained ceramics with open, open-closed and closed pores can be prepared from large, medium and small sand particles, respectively.
引用
收藏
页数:5
相关论文
共 50 条
  • [21] Microstructure and properties of translucent Mg-sialon ceramics prepared by spark plasma sintering
    Xiong, Y.
    Fu, Z. Y.
    Wang, H.
    Wang, Y. C.
    Zhang, J. Y.
    Zhang, Q. J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2): : 475 - 481
  • [22] Study on phase transformation and microstructure development of Yb α-SiAlON ceramics prepared by pressureless sintering
    Liu, GH
    Chen, KX
    Zhou, HP
    Ferreira, JMF
    [J]. PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 1271 - 1274
  • [23] Effect of sintering behavior on the porous structure of porous quartz ceramics
    Song, Jieguang
    Ji, Gangchang
    Li, Shibin
    Du, Daming
    Wang, Fang
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2013, 104 (01) : 93 - 98
  • [24] The microstructure and thermal conductivity of porous β-SiAlON ceramics fabricated by pressureless sintering with Y-α-SiAlON as the sintering additive
    Li, Xueqing
    Yao, Dongxu
    Zuo, Kaihui
    Xia, Yongfeng
    Yin, Jinwei
    Liang, Hanqin
    Zeng, Yu-Ping
    [J]. CERAMICS INTERNATIONAL, 2022, 48 (05) : 6177 - 6184
  • [25] Understanding the Self-Sintering Process of BOS Filter Cake for Improving Its Recyclability
    Longbottom, Raymond J.
    Monaghan, Brian J.
    Pinson, David J.
    Chew, Sheng J.
    [J]. JOURNAL OF SUSTAINABLE METALLURGY, 2019, 5 (03) : 429 - 441
  • [26] Understanding the Self-Sintering Process of BOS Filter Cake for Improving Its Recyclability
    Raymond J. Longbottom
    Brian J. Monaghan
    David J. Pinson
    Sheng J. Chew
    [J]. Journal of Sustainable Metallurgy, 2019, 5 : 429 - 441
  • [27] Preparation of porous SiC-ceramics by sol-gel and spark plasma sintering
    Simonenko, Elizaveta P.
    Simonenko, Nikolay P.
    Papynov, Eugeniy K.
    Shichalin, Oleg O.
    Golub, Andrey V.
    Mayorov, Vitaliy Yu
    Avramenko, Valentin A.
    Sevastyanov, Vladimir G.
    Kuznetsov, Nikolay T.
    [J]. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2017, 82 (03) : 748 - 759
  • [28] Sintering Behavior and Microstructure Development of Porous Silicon Nitride Ceramics Prepared in an Air Atmosphere Furnace
    Plucknett, Kevin
    [J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2009, 6 (06) : 702 - 716
  • [29] Study on the sintering mechanism and properties of porous ceramics prepared by silicon carbide abrasive particles with multi-mineral sintering additives and silica sols
    Fei, Yanhan
    Song, Xujie
    Du, Lanjun
    Wang, Yanchun
    Du, Zhiming
    [J]. CERAMICS INTERNATIONAL, 2022, 48 (19) : 27324 - 27333
  • [30] Sintering behavior of alumina rich cordierite porous ceramics
    Senguttuvan, T
    Kalsi, HS
    Sharda, SK
    Das, BK
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2001, 67 (1-3) : 146 - 150