Sodium borosilicate glass produced from coal fly ash upon vitrification in an induction-melting furnace

被引:0
作者
Park, Jong-Soo [1 ]
Taniguchi, Shoji [1 ]
机构
[1] Tohoku Univ, Grad Sch Environm Studies, Sendai, Miyagi 9808579, Japan
来源
TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 32, NO 3 | 2007年 / 32卷 / 03期
关键词
fly ash; alkali borosilicate glass; vitrification; induction furnace; susceptor;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Sodium borosilicate glasses were produced from coal fly ash and their properties were investigated. Fly ash could be vitrified completely by induction heating at 1500 C for 30 min with Na2O or B2O3 additions of more than 10 wt.%. The induction furnace incorporated a new method, namely, induction susceptor heating and employed a cyrindrical graphite rod as the susceptor that could efficiently capture the electromagnetic energy. The alkali borosilicate glasses produced had Vickers microhardness of 3000-4000 MPa, bending strength of 30-40 MPa and indentation fracture toughness of 0.7-1.1 MPa. m(1/2). With suitable Na2O and B2O3 addition, their melting points decreased down form 1500 degrees C to less than 1200 degrees C. Finally, their chemical resistances against acid leaching indicated that heavy metals were immobilized well under environmental regulation. Therefore, alkali borosilicate fly ash glasses should be recycled as materials with good chemical resistance.
引用
收藏
页码:619 / 622
页数:4
相关论文
共 40 条
[31]   Synthesis and Characterization of Zeolites Produced from Low-Quality Coal Fly Ash and Wet Flue Gas Desulphurization Wastewater [J].
Nowak, Paulina ;
Muir, Barbara ;
Solinska, Agnieszka ;
Franus, Malgorzata ;
Bajda, Tomasz .
MATERIALS, 2021, 14 (06)
[32]   Synthesis and characterization of nano sodium vanadate rods from fly ash produced from heavy oil-fired electrical power stations [J].
El-Agamy, Hayat H. .
INORGANIC AND NANO-METAL CHEMISTRY, 2024, 54 (11) :1163-1170
[33]   Effect of CaO/SiO2 mass ratio on the properties of glass ceramics containing 10% Al2O3 from blast furnace slag, tailing and coal fly ash [J].
Liu, Zhao-Bo ;
Zong, Yan-Bing ;
Ma, Hao-Yuan ;
Dai, Wen-Bin ;
Li, Yu .
Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (06) :757-763
[34]   Direct identification of hazardous elements in ultra-fine and nanominerals from coal fly ash produced during diesel co-firing [J].
Martinello, Katia ;
Oliveira, Marcos L. S. ;
Molossi, Fernando A. ;
Ramos, Claudete G. ;
Teixeira, Elba C. ;
Kautzmann, Rubens M. ;
Silva, Luis F. O. .
SCIENCE OF THE TOTAL ENVIRONMENT, 2014, 470 :444-452
[35]   Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3 [J].
Zhu, Jian-bin ;
Yan, Hong .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017, 24 (03) :309-315
[36]   Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3 [J].
Jian-bin Zhu ;
Hong Yan .
International Journal of Minerals, Metallurgy, and Materials, 2017, 24 :309-315
[37]   Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3 [J].
Jian-bin Zhu ;
Hong Yan .
InternationalJournalofMineralsMetallurgyandMaterials, 2017, 24 (03) :309-315
[38]   Separation Process and Microstructure-Chemical Composition Relationship of Cenospheres from Lignite Fly Ash Produced from Coal-Fired Power Plant in Thailand [J].
Yoriya, Sorachon ;
Tepsri, Phattarathicha .
APPLIED SCIENCES-BASEL, 2020, 10 (16)
[39]   Elution of heavy metals from granulates produced from municipal sewage deposits and fly-ash of hard and brown coal in the aspect of recycling for fertilization purposes [J].
Rosik-Dulewska, Czeslawa ;
Glowala, Katarzyna ;
Karwaczynska, Urszula ;
Robak, Jolanta .
ARCHIVES OF ENVIRONMENTAL PROTECTION, 2008, 34 (02) :63-71
[40]   Structure and properties of in situ synthesized FeSi2-diopside glass ceramic composites from Bayan Obo tailings, blast furnace slag, and fly ash [J].
Deng, Leibo ;
Zhang, Xuefeng ;
Zhang, Mingxing ;
Jia, Xiaolin ;
Zhang, Zhen ;
Li, Baowei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 785 :932-943