Experiments on New Arrangements of Convex and Concave Corrugated Tubes through a Double-pipe Heat Exchanger

被引：26

作者：

Dizaji, Hamed Sadighi ^{[1
]}

Jafarmadar, Samad ^{[1
]}

机构：

[1] Urmia Univ, Dept Mech Engn, Orumiyeh 5756115311, Iran

来源：

EXPERIMENTAL HEAT TRANSFER | 2016年 / 29卷 / 05期

关键词：

corrugated tube; heat exchanger; heat transfer; friction factor; PRESSURE-DROP; TRANSFER COEFFICIENT; FRICTION FACTOR; ENHANCEMENT; NANOFLUID; R-134A; FLOW;

D O I：

10.1080/08916152.2015.1046015

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The main scope of this article paper is to experimentally clarify the effects of outer-tube and inner-tube corrugations on thermal and frictional characteristics in a horizontal double-pipe heat exchanger. Nusselt number, friction factor, and thermal performance factor are evaluated for new various arrangements of convex and concave corrugated tubes. Smooth tubes were corrugated by means of a special machine. Findings indicate that the arrangement type of corrugated tubes has a significant effect on the mentioned parameters. The best performance was obtained for a heat exchanger made of a concave corrugated outer tube and a convex corrugated inner tube.

引用

页码：577 / 592

页数：16

共 18 条

[1] Experimental studies on heat transfer in the annuli with corrugated inner tubes
Ahn, SW
[J]. KSME INTERNATIONAL JOURNAL, 2003, 17 (08): : 1226 - 1233
[2] Experimental Study on Evaporative Heat Transfer and Pressure Drop of R-134a Flowing Downward Through Vertical Corrugated Tubes with Different Corrugation Pitches
Aroonrat, K.
Dalkilic, A. S.
Wongwises, S.
[J]. EXPERIMENTAL HEAT TRANSFER, 2013, 26 (01) : 41 - 63
[3] Evaporation heat transfer and friction characteristics of R-134a flowing downward in a vertical corrugated tube
Aroonrat, Kanit
Wongwises, Somchai
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (01) : 20 - 28
[4] Experimental investigation of convective heat transfer and friction factor of Al2o3/water nanofluid in helically corrugated tube
Darzi, Ahmad Ali Rabienataj
Farhadi, Mousa
Sedighi, Kurosh
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 57 : 188 - 199
[5] Multi-objective shape optimization of double pipe heat exchanger with inner corrugated tube using RSM method
Han, Huai-Zhi
Li, Bing-Xi
Wu, Hao
Shao, Wei
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2015, 90 : 173 - 186
[6] Correlations for evaporation heat transfer coefficient and two-phase friction factor for R-134a flowing through horizontal corrugated tubes
Laohalertdecha, Suriyan
Dalkilic, Ahmet Selim
Wongwises, Somchai
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2011, 38 (10) : 1406 - 1413
[7] The effects of corrugation pitch on the condensation heat transfer coefficient and pressure drop of R-134a inside horizontal corrugated tube
Laohalertdecha, Suriyan
Wongwises, Somchai
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (13-14) : 2924 - 2931
[8] 3D numerical study on shell side heat transfer and flow characteristics of rod-baffle heat exchangers with spirally corrugated tubes
Liu, J. J.
Liu, Z. C.
Liu, W.
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2015, 89 : 34 - 42
[9] Hydrodynamic and thermal characteristics of corrugated channels: Experimental approach
Mehrabian, MA
Poulter, R
Quarini, GL
[J]. EXPERIMENTAL HEAT TRANSFER, 2000, 13 (03) : 223 - 234
[10] Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib
Naphon, Paisarn
Nuchjapo, Manachai
Kurujareon, Jutarat
[J]. ENERGY CONVERSION AND MANAGEMENT, 2006, 47 (18-19) : 3031 - 3044

← 1 2 →