Plasmid purification by using a new naphthalene tripodal support

The aim of this work was to employ a new naphthalene tripodal support for the isolation of supercoiled (sc) isoform of plasmid (pDNA) from a native sample. This support is for the first time synthesized and used in pDNA purification. The naphthalene tripodal ligand was synthesized and characterized to assess its purity and subsequently immobilized onto an epoxy-activated Sepharose CL-6B, using mild conditions and resulting in a ligand density of 0.32 mmol naphthalene tripodal/g derivatized Sepharose CL-6B. The complete characterization of naphthalene tripodal Sepharose CL-6B support was performed by High Resolution Magic Angle Spinning (HR-MAS) NMR spectroscopy, scanning electron microscopy (SEM) and elemental analysis. The affinity was measured by SPR biosensor between naphthalene tripodal ligand immobilized on the surface and sc pVAX1-LacZ and the K-D was 8.65 x 10(-8) +/- 1.0 x 10(-8) M in 10 mM Tris-HCl pH 8.0, at T = 25 degrees C, indicating a high affinity. For comparison reasons, the affinity ligand 3,8-diamino-6-phenylphe nanthridine (DAPP) was also immobilized on the chip surface and the K-D for sc pVAX1-LacZ is lower than with naphthalene tripodal. Saturation transfer difference -nuclear magnetic resonance spectroscopy (STD-NMR) experiments showed that the interactions between the naphthalene tripodal-Sepharose CL-6B and DAPP-Sepharose supports and the 5'-mononucleotides are mainly hydrophobic and pi-pi stacking. The isolation of sc pDNA isoform was achieved with low salt concentrations, using 95 mM NaCl in binding step and 550 mM NaCI in elution step at T = 4 degrees C and pH 8, thus reducing the economic and environmental impact. (C) 2017 Elsevier B.V. All rights reserved.