The Flexural, Impact and Thermal Properties of Untreated Short Sugar Palm Fibre Reinforced High Impact Polystyrene (HIPS) Composites

被引:26
作者
Bachtiar, D. [1 ]
Sapuan, S. M. [1 ]
Khalina, A. [2 ]
Zainudin, E. S. [1 ,3 ]
Dahlan, K. Z. M. [4 ]
机构
[1] Univ Putra Malaysia, Dept Mech & Mfg Engn, Serdang 43400, Selangor, Malaysia
[2] Univ Putra Malaysia, Dept Biol & Agr Engn, Serdang 43400, Selangor, Malaysia
[3] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod, Fac Forestry, Upm Serdang 43400, Selangor, Malaysia
[4] Agensi Nuklear Malaysia, Radiat Proc Div, Kajang 40300, Selangor, Malaysia
关键词
Sugar palm fibre; HIPS; Flexural; Impact; Moisture; DMA; TGA; DYNAMIC-MECHANICAL ANALYSIS; TENSILE PROPERTIES; NATURAL FIBERS;
D O I
10.1177/096739111202000510
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This study investigated the mechanical and thermal performance of short sugar palm (Arenga pinnata) fibre-reinforced high impact polystyrene composites. Fibre sizes of 30-50 mesh and five different fibre loadings from 10 to 50% by weight have been used. The melt mixing method and hot compression moulding were used as the fabrication techniques for the composites. The flexural behaviour, impact testing, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and the moisture absorption of short SPF-HIPS composites reinforced with varying fibre loadings were studied. The results showed that increasing the loading of short SPF in the HIPS matrix improved the flexural moduli of the composites. Lower impact strength resulted when the fibre loading was increased, and the moisture content increased significantly. The DMA test results showed increases in the storage modulus and thermal stability for the SPF-HIPS composites. Finally, the TGA test showed degradation behaviour of the composites when they were exposed to a high temperature environment. With some advantage embedding these fibres can be an alternative choice of natural fibre for reinforcing thermoplastics.
引用
收藏
页码:493 / 501
页数:9
相关论文
共 26 条
  • [11] MULTIPURPOSE PALMS - THE SUGAR PALM (ARENGA-PINNATA (WURMB) MERR)
    MOGEA, J
    SEIBERT, B
    SMITS, W
    [J]. AGROFORESTRY SYSTEMS, 1991, 13 (02) : 111 - 129
  • [12] Nair KCM, 2001, COMPOS SCI TECHNOL, V61, P2519, DOI 10.1016/S0266-3538(01)00170-1
  • [13] Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibres
    Ray, D
    Sarkar, BK
    Das, S
    Rana, AK
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (7-8) : 911 - 917
  • [14] Rowell RW, 2008, WOODHEAD PUBL MATER, P3, DOI 10.1533/9781845694593.1.3
  • [15] Saheb DN, 1999, ADV POLYM TECH, V18, P351, DOI 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO
  • [16] 2-X
  • [17] Sanadi A.R., 1997, PAPER COMPOSITES AGR
  • [18] Sastra H. Y., 2005, American Journal of Applied Sciences, P21
  • [19] Tensile properties of Arenga pinnata fiber-reinforced epoxy composites
    Sastra, HY
    Siregar, JP
    Sapuan, SM
    Hamdan, MM
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2006, 45 (01) : 149 - 155
  • [20] Siregar J.P., 2005, THESIS U PUTRA MALAY