R&D status of key technologies for the development of KO TBM

被引:7
作者
Cho, Seungyon [1 ]
Ahn, Mu-Young [1 ]
Yu, In-Keun [1 ]
Ku, Duck Young [1 ]
Lee, Sang-Jin [2 ]
Yoon, Han-Ki [3 ]
Kim, Tae-Gyu [4 ]
机构
[1] Natl Fus Res Inst, Taejon, South Korea
[2] Mokpo Natl Univ, Muan, South Korea
[3] Dong Eui Univ, Pusan, South Korea
[4] Pusan Natl Univ, Pusan, South Korea
基金
新加坡国家研究基金会;
关键词
TBM; Graphite pebble; SiC coating; Lithium titanate; Lithium silicate; TEST BLANKET MODULE; THERMAL-CONDUCTIVITY; VAPOR-DEPOSITION; SIC COATINGS; PEBBLE BEDS; FABRICATION; BEHAVIOR; DESIGN; STEEL;
D O I
10.1016/j.fusengdes.2011.01.042
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
R&D activities currently being undertaken for Korean Helium Cooled Solid Breeder (HCSB) Test Blanket Module (IBM) include joining technologies of structural materials, breeder pebble material development, and measurement of pebble bed characteristics. The joining performance of ferritic-martensitic steel is evaluated. TIG welding for ferritic-martensitic steel is evaluated to find welding conditions with two different current modes. The fabrication methods of lithium silicate powder and lithium titanate pebble are under development using special process. The Li(2)TiO(3) pebbles showing an average diameter of 1.8 mm was fabricated by water-based sol-gel method. The Li(4)SiO(4) powder with the particle size of about 200 nm was synthesized by PVA polymer solution method. The method of silicon carbide coating on the graphite pebble is investigated, and its possibility is verified based on the coating results on the graphite plate. Sputtered SiC coating layer was crystallized by high temperature heat treatment. The measurement method and database of the thermal properties of the pebble and pebble bed are important for the design of TBM as well as breeding blanket. The initial characteristics of the pebbles are assessed measuring the effective thermal diffusivity of graphite pebble by laser flash method. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码:2223 / 2227
页数:5
相关论文
共 17 条
[1]   Materials and design of the European DEMO blankets [J].
Boccaccini, LV ;
Giancarli, L ;
Janeschitz, G ;
Hermsmeyer, S ;
Poitevin, Y ;
Cardella, A ;
Diegele, E .
JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :148-155
[2]   Chemical synthesis and characterization of lithium orthosilicate (Li4SiO4) [J].
Chang, CC ;
Wang, CC ;
Kumta, PN .
MATERIALS & DESIGN, 2001, 22 (07) :617-623
[3]   R&D activities on helium cooled solid breeder TBM in Korea [J].
Cho, S. ;
Ahn, M. Y. ;
Yu, I. K. ;
Lee, S. J. ;
Yoon, H. K. ;
Oh, S. J. ;
Ku, D. Y. ;
Oh, D. K. ;
Jhang, H. ;
Oh, W. ;
Kim, D. H. ;
Lee, H. G. .
FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) :1608-1614
[4]   CURRENT R&D ACTIVITIES ON KOREAN HELIUM COOLED SOLID BREEDER TEST BLANKET MODULE [J].
Cho, Seungyon ;
Ahn, Mu-Young ;
Ku, Duck Young ;
Kim, Duck Hoi ;
Yu, In-Keun ;
Han, Seunghee ;
Kim, Dong-Ik ;
Yoon, Han-Ki ;
Lee, Sang-Jin .
FUSION SCIENCE AND TECHNOLOGY, 2009, 56 (01) :216-220
[5]   Development of low activation ferritic/martensitic steel welding technology for the fabrication of KO HCSB TBM [J].
Cho, Seungyon ;
Kim, Duck-Hoi ;
Ahn, Mu-Young .
JOURNAL OF NUCLEAR MATERIALS, 2009, 386-88 :491-494
[6]   Current status of design and analysis of Korean Helium-Cooled Solid Breeder Test Blanket Module [J].
Cho, Seungyon ;
Ahn, Mu-Young ;
Kim, Duck Hoi ;
Lee, Eun-Seok ;
Yun, Sunghwan ;
Cho, Nam Zin ;
Jung, Ki Jung .
FUSION ENGINEERING AND DESIGN, 2008, 83 (7-9) :1163-1168
[7]   Amorphous SiC coatings for WC cutting tools [J].
Costa, AK ;
Camargo, SS .
SURFACE & COATINGS TECHNOLOGY, 2003, 163 :176-180
[8]  
Kim HS, 1999, J AM CERAM SOC, V82, P331
[9]   The binary system Li2O-SiO2 [J].
Kracek, FC .
JOURNAL OF PHYSICAL CHEMISTRY, 1930, 34 (12) :2641-2650
[10]   HIP joining of RAFM/RAFM steel and beryllium/RAFM steel for fabrication of the ITER TBM first wall [J].
Lee, Jung-Suk ;
Park, Jeong-Yong ;
Choi, Byung-Kwon ;
Hong, Bong Guen ;
Jung, Ki-Jung ;
Jeong, Yong Hwan .
METALS AND MATERIALS INTERNATIONAL, 2009, 15 (03) :465-470