EXPERIMENTAL DETERMINATION OF PROCESS PARAMETERS FOR SUPERPLASTIC FORMING FROM AA7075 ALUMINUM ALLOY

被引：0

作者：

Nguyen, Manh Tien ^{[1
]}

机构：

[1] Le Quy Don Tech Univ, Fac Mech Engn, Hanoi, Vietnam

来源：

SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY | 2022年 / 29卷 / 05期

关键词：

Superplastic Forming; Free Bulging Test; Tensile Test; Strain Rate Sensitivity; AA7075; Alloy; STRAIN-RATE SENSITIVITY; BEHAVIOR; TESTS;

D O I：

暂无

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

In this study, experimental processes are presented to determine the process parameters for superplastic forming (SPF) AA7075 aluminum alloy. The thermomechanical method is performed to prepare the fine stable grain microstructure for AA7075 alloy. Subsequently, the tensile tests and the free bulging tests were carried out under different conditions for the alloy sheet with a thickness of 1.2 mm. The results determine the process parameter ranges of the SPF including deformation temperature of 500-530?, forming pressure of 0.6-0.8MPa, and forming time of 20-40 minutes. The strain rate sensitivity is also calculated with values in the range of 0.3-0.6. The obtained results are an important basis for designing the technological process for the SPF of the studied alloy.

引用

页数：6

共 22 条

[1] Determination of material parameters for 7475 Al alloy from bulge forming tests at constant stress [J].

Aoura, Y ;

Ollivier, D ;

Ambari, A ;

Dal Santo, P .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 145 (03) :352-359

[2] Determination of Material Parameters during Superplastic Forming of AA 5086 Alloy [J].

Babu, S. Ramesh ;

Deivanayagam, S. ;

Aravind, M. .

12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 :1379-1386

[3]

Bhatta Laxman, 2020, METALS OPEN ACCESS M, V10, P1

[4] Superplasticity of a Friction Stir Processed 7075-T651 aluminum alloy [J].

Dieguez, T. ;

Burgueno, A. ;

Svoboda, H. .

11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011, 2012, 1 :110-117

[5]

Dorward R.C., 1988, MAT DESIGN, V9, P63, DOI [10.1016/0261-3069(88)90076-3, DOI 10.1016/0261-3069(88)90076-3]

[6] The determination of material parameters from superplastic free-bulging tests at constant pressure [J].

Giuliano, G. ;

Franchitti, S. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (12-13) :1519-1522

[7]

Giuliano G, 2011, WOODHEAD PUBL MATER, P1, DOI 10.1533/9780857092779

[8] AN ANALYSIS OF BULGING OF A SUPERPLASTIC SHEET BY LATERAL PRESSURE [J].

HOLT, DL .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1970, 12 (06) :491-&

[9] Improvement of mechanical properties for Al alloys using equal-channel angular pressing [J].

Horita, Z ;

Fujinami, T ;

Nemoto, M ;

Langdon, TG .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) :288-292

[10] Enhancement of strength and superplasticity in a 6061 Al alloy processed by equal-channel-angular-pressing [J].

Kim, WJ ;

Kim, JK ;

Park, TY ;

Hong, SI ;

Kim, DI ;

Kim, YS ;

Lee, JD .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (10) :3155-3164

← 1 2 3 →