Influence of crystal orientation on the thermomechanical fatigue behaviour in a single-crystal superalloy

被引:65
作者
Segersall, Mikael [1 ]
Leidermark, Daniel [2 ]
Moverare, Johan J. [1 ]
机构
[1] Linkoping Univ, Div Engn Mat, SE-58183 Linkoping, Sweden
[2] Linkoping Univ, Div Solid Mech, SE-58183 Linkoping, Sweden
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 623卷
关键词
Single-crystal superalloy; Crystal orientation dependence; Thermomechanical fatigue; Deformation mechanisms; Finite element applicability; LOW-CYCLE FATIGUE; PARTICLE HARDENING MECHANISMS; TEMPERATURE-DEPENDENCE; STRESS-RELAXATION; CRACK INITIATION; BASE ALLOYS; DEFORMATION; CREEP; FAILURE; RENE-N4;
D O I
10.1016/j.msea.2014.11.026
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this study, the influence of crystal orientation on the thermomechanical fatigue (TMF) behaviour of the recently developed single-crystal superalloy STAL-15 is considered, both from an experimental and a modelling perspective. Experimental results show that there is a strong influence of the elastic stiffness, with respect to the loading direction, on the TMF life. However, the results also indicate that the number of active slip planes during deformation influence the TMF life, where specimens with a higher number of active slip planes are favoured compared to specimens with fewer active slip planes. The higher number of active slip planes results in a more widespread deformation compared to a more concentrated deformation when fewer slip planes are active. Deformation bands with smeared and elongated gamma'-precipitates together with deformation twinning were found to be major deformation mechanisms, where the twins primarily were observed in specimens with several active slip planes. From a modelling perspective, the crystal orientation with respect to the loading direction is quantified and adopted into a framework which makes it possible to describe the internal crystallographic arrangement and its entities in a material model. Further, a material model which incorporates the crystal orientation is able to predict the number of slip planes observed from microstructural observations, as well as the elastic stiffness of the material with respect to the loading direction. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:68 / 77
页数:10
相关论文
共 48 条
[1]  
[Anonymous], 2011, NONLINEAR MECH CRYST
[2]  
[Anonymous], 2012, INTERNAL REPORT
[3]   Effect of crystal orientation on fatigue failure of single crystal nickel base turbine blade superalloys [J].
Arakere, NK ;
Swanson, G .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2002, 124 (01) :161-176
[4]  
Beeley P. R., 1995, INVESTMENT CASTING M
[5]   Process modelling of grain selection during the solidification of single crystal superalloy castings [J].
Carter, P ;
Cox, DC ;
Gandin, CA ;
Reed, RC .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 280 (02) :233-246
[6]  
Cumpsty N.A., 1997, Jet Propulsion: A Simple Guide to the Aerodynamic and Thermodynamic Design and Performance of Jet Engines
[7]  
Dalal R., 1984, Proc. Fifth Symposium on Superalloys, V84, P185, DOI DOI 10.7449/1984/SUPERALLOYS_1984_185_197
[8]  
Dietrich K., 2013, OPTIMIZATION SECURIT, P79
[9]   ORIENTATION AND TEMPERATURE-DEPENDENCE OF SOME MECHANICAL-PROPERTIES OF THE SINGLE-CRYSTAL NICKEL-BASE SUPERALLOY RENE-N4 .2. LOW-CYCLE FATIGUE BEHAVIOR [J].
GABB, TP ;
GAYDA, J ;
MINER, RV .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (03) :497-505
[10]   THE HIGH-TEMPERATURE DEFORMATION IN CYCLIC LOADING OF A SINGLE-CRYSTAL NICKEL-BASE SUPERALLOY [J].
GABB, TP ;
WELSCH, G .
ACTA METALLURGICA, 1989, 37 (09) :2507-2516