High-performance gap-closing vibrational energy harvesting using electret-polarized dielectric oscillators

被引:19
作者
Feng, Yue [1 ]
Yu, Zejie [1 ]
Han, Yanhui [1 ]
机构
[1] Beijing Inst Technol, Sch Mechatron Engn, Beijing 100081, Peoples R China
基金
中国国家自然科学基金;
关键词
Permittivity - Energy harvesting - Electrostatics;
D O I
10.1063/1.5004254
中图分类号
O59 [应用物理学];
学科分类号
摘要
In conventional gap-closing electret-biased electrostatic energy harvesting (EEEH) schemes, electrets with a very low ratio of electret thickness to permittivity are in great demand to allow the attainment of high power output. However, in practice, pursuing such a low ratio introduces unwanted burdens on the electret stability and therefore the reliability of the EEEH devices. In this paper, we propose a dielectric-oscillator-based electrostatic EH (DEEH) scheme as an alternative approach to harvesting electret-biased electrostatic energy. This approach permits the fabrication of an electret-free closed EH circuit. The DEEH architecture directly collects the electrical energy exclusively through the oscillating dielectric body and thus completely circumvents the restrictions imposed by the electret parameters (thickness and permittivity) on power generation. Significantly, without considering the electret thickness and permittivity, both theoretical analysis and experiments have verified the effectiveness of this DEEH strategy, and a high figure of merit (on the order of 10(-8) mW cm(-2) V-2 Hz(-1)) was achieved for low-frequency movements. Published by AIP Publishing.
引用
收藏
页数:4
相关论文
共 28 条
[1]   Air gap optimization for output power and band width in out-of-plane vibration energy harvesters employing electrets [J].
Asanuma, H. ;
Hara, M. ;
Oguchi, H. ;
Kuwano, H. .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2015, 25 (10)
[2]   A batch-fabricated and electret-free silicon electrostatic vibration energy harvester [J].
Basset, P. ;
Galayko, D. ;
Paracha, A. Mahmood ;
Marty, F. ;
Dudka, A. ;
Bourouina, T. .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2009, 19 (11)
[3]   Cantilever-based electret energy harvesters [J].
Boisseau, S. ;
Despesse, G. ;
Ricart, T. ;
Defay, E. ;
Sylvestre, A. .
SMART MATERIALS AND STRUCTURES, 2011, 20 (10)
[4]   Optimization of an electret-based energy harvester [J].
Boisseau, S. ;
Despesse, G. ;
Sylvestre, A. .
SMART MATERIALS AND STRUCTURES, 2010, 19 (07)
[5]   Flat and robust out-of-plane vibrational electret energy harvester [J].
Chiu, Yi ;
Lee, Yen-Chieh .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2013, 23 (01)
[6]  
Cong T. V., 2013, SMART MATER STRUCT, V22
[7]   Trench-filled cellular parylene electret for piezoelectric transducer [J].
Feng, Yue ;
Hagiwara, Kei ;
Iguchi, Yoshinori ;
Suzuki, Yuji .
APPLIED PHYSICS LETTERS, 2012, 100 (26)
[8]   Design optimization of an out-of-plane gap-closing electrostatic Vibration Energy Harvester (VEH) with a limitation on the output voltage [J].
Guillemet, R. ;
Basset, P. ;
Galayko, D. ;
Bourouina, T. .
ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2012, 71 (01) :39-47
[9]   Characterization of charge carrier lateral conduction in irradiated dielectric materials [J].
Hanna, R. ;
Paulmier, T. ;
Belhaj, M. ;
Molinie, P. ;
Dirassen, B. ;
Payan, D. ;
Balcon, N. .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (44)
[10]   Electret transducer for vibration-based energy harvesting [J].
Hillenbrand, J. ;
Pondrom, P. ;
Sessler, G. M. .
APPLIED PHYSICS LETTERS, 2015, 106 (18)