Adaptive two-degree-of-freedom control of feed drive systems

Feed drive systems are widely used in industrial applications, and many efforts for improving their precision control have been made thus far. One of the basic approaches for improving the control accuracy of feed drive systems is to design a controller based on the internal model principle, which states that for a control system to track a reference signal without a steady state error, it needs to include a generator of the reference signal. Feed-forward controllers, such as the zero phase error tracking controller (ZPETC) proposed by Tomizuka, are also employed for improving control performance. However, prior knowledge of plant dynamics and/or reference signal properties is required for both the internal model principle and the feed-forward controller based designs. For precision control, plant dynamics should be identified in real time because feed drive dynamics are affected by varying conditions, such as frictional and thermal effects. This paper presents a new type of adaptive control for arbitrary reference tracking, which requires neither plant dynamics nor reference signal properties for controller design. This type of controller can also reduce the effect of unknown disturbances. The control system is designed using a discrete-time plant model and consists of adaptive feed-forward and feedback controllers. This design is then applied to a feed drive system with a ball screw drive. The effectiveness of the proposed design is demonstrated by simulation and experimental results, which was obtained by applying the proposed control system to an unknown reference signal whose property is varied during control. (c) 2007 Elsevier Ltd. All rights reserved.