Additional cogging torque components due to asymmetry in stator back iron of PM synchronous motors

被引:5
|
作者
Gasparin, Lovrenc [1 ]
Cernigoj, Andrej [1 ]
Fiser, Rastko [2 ,3 ]
机构
[1] Iskra Avtoelekt Dd, Inst Elect Rotary Syst, Sempeter Pri Gorici, Slovenia
[2] Univ Ljubljana, Fac Elect Engn, Lab Elect Drives, Ljubljana, Slovenia
[3] Univ Ljubljana, Dept Mechatron, Ljubljana, Slovenia
关键词
Torque; Electrical machines; Magnetic devices; Harmonics; MAGNET BRUSHLESS MACHINES; REDUCTION;
D O I
10.1108/03321641111110861
中图分类号
TP39 [计算机的应用];
学科分类号
081203 ; 0835 ;
摘要
Purpose - The purpose of this paper is to present the dependence of the level and harmonic structure of the cogging torque in permanent magnet synchronous motors (PMSM) to interlocks and notches in a stator back iron, which are standard methods for stator lamination stacking in mass-production. Design/methodology/approach - Methods of stacking up the lamination like welding or interlocking are introducing magnetic asymmetries in stator back iron which causes additional harmonic components (AHC). A finite element method and Fast Fourier transform were used to calculate cogging torque harmonic components (HC) with regard to the applied number and positions of interlocks and notches. All simulation results were verified by laboratory tests. Findings - It has been established and proved that technologies for stacking lamination packs cause local saturation peaks in back iron which give rise to additional cogging torque AHC and consequently increase the total cogging torque. It is also shown that the magnetic properties of interlocks cannot be simply considered as air regions but adequate relative permeability of such affected soft magnetic material must be determined to improve the accuracy of FEM calculations. Practical implications - Considering presented results, it is possible to foresee which AHC will include the cogging torque of mass-produced PMSMs due to the stator lamination stacking methods. In this way, the optimal stacking method can be selected in order to minimize the effect of AHC. Originality/value - So far, authors dealing with the cogging torque have not taken into account the influence of the stator lamination stacking method on the level of torque oscillations.
引用
收藏
页码:894 / 905
页数:12
相关论文
共 50 条
  • [1] Native and Additional Cogging Torque Components of PM Synchronous Motors - Evaluation and Reduction
    Cernigoj, Andrej
    Gasparin, Lovrenc
    Fiser, Rastko
    AUTOMATIKA, 2010, 51 (02) : 157 - 165
  • [2] Phenomena of additional cogging torque components influenced by stator lamination stacking methods in PM motors
    Gasparin, Lovrenc
    Cernigoj, Andrej
    Fiser, Rastko
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2009, 28 (03) : 682 - 690
  • [3] Influence of asymmetries in stator back iron of PMS motors to the level of cogging torque components
    Gasparin, Lovrenc
    Fiser, Rastko
    PRZEGLAD ELEKTROTECHNICZNY, 2011, 87 (03): : 53 - 56
  • [4] Detection and FEM Analysis of Additional Cogging Torque Components in PM Motors
    Gasparin, Lovrenc
    Fiser, Rastko
    PRZEGLAD ELEKTROTECHNICZNY, 2008, 84 (12): : 163 - 166
  • [5] Unbalanced magnetic force and cogging torque of PM motors due to the interaction between PM magnetization and stator eccentricity
    Seo, Bosung
    Sung, Sangjin
    Kang, Kyungjin
    Song, Jeongyong
    Jang, Gunhee
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2016, 22 (06): : 1249 - 1255
  • [6] Unbalanced magnetic force and cogging torque of PM motors due to the interaction between PM magnetization and stator eccentricity
    Bosung Seo
    Sangjin Sung
    Kyungjin Kang
    Jeongyong Song
    Gunhee Jang
    Microsystem Technologies, 2016, 22 : 1249 - 1255
  • [7] Additional Cogging Torque Components in Permanent-Magnet Motors Due to Manufacturing Imperfections
    Gasparin, Lovrenc
    Cernigoj, Andrej
    Markic, Stojan
    Fiser, Rastko
    IEEE TRANSACTIONS ON MAGNETICS, 2009, 45 (03) : 1210 - 1213
  • [8] Detection and analysis of additional cogging torque harmonic components in permanent-magnet synchronous motors
    Gasparin, Lovrenc
    Fiser, Rastko
    ELEKTROTEHNISKI VESTNIK-ELECTROCHEMICAL REVIEW, 2008, 75 (03): : 129 - 135
  • [9] Research on Cogging Torque of PM Synchronous Motors Considering Load condition
    Wang, Weiye
    Liu, Xun
    Qiu, Xin
    Yang, Jianfei
    2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2018, : 501 - 504
  • [10] PM Arrangement Design of PM-Assisted Synchronous Reluctance Motors for maximize back-EMF and Cogging Torque Reduction
    Liu, Huai-Cong
    Jeong, Geochul
    Jung, Soo-Jin
    Lee, Ju
    2016 IEEE CONFERENCE ON ELECTROMAGNETIC FIELD COMPUTATION (CEFC), 2016,