A Novel Design of High Resolution MEMS Gyroscope Using Mode-Localization in Weakly Coupled Resonators

This paper presents a novel design for a high resolution microelectromechanical systems (MEMS) technology based resonant gyroscope using the mode-localization effect in weekly coupled resonators (WCRs) as a mechanism for sensing the input angular rate. The design consists of a single proof mass with two three degree-of-freedom (3-DoF) WCRs systems attached on either side. The MEMS gyroscope is designed according to the microfabrication constraints of the foundry process, silicon-on-insulator multi-user MEMS process (SOIMUMPs). The shift in the resonance frequency values, amplitude ratios of the WCRs, and amplitude ratios difference of two sets due to electrostatic stiffness perturbation, corresponding to the input angular rotation, are discussed as an output metric for the measurement of angular rate. The results show that the amplitude ratio difference as an output metric allows achieving a linear output response and large dynamic range in comparison to the shift in the amplitude ratio and resonance frequency in 3-DoF WCRs in a single set. The dynamic range and resolution of the MEMS gyroscope in terms of maximum allowed resonators amplitude and the noise floor is discussed. The proposed MEMS gyroscope design has a sensitivity of 62830 ppm/degrees/s based on a difference in the amplitude ratios of resonators in two 3-DoF WCRs systems and a dynamic range of +/- 100 degrees/s. The resolution of the MEMS gyroscope is 31.09 x 10(-6)degrees/s which is significantly higher than existing MEMS gyroscopes and is comparable to traditional bulky ring laser gyroscopes. This high resolution makes the proposed MEMS gyroscope design suitable for use in applications such as earth rotation rate measurement for gyrocompassing and high precision robotics.