Investigation of unsteady flow field in a vaned diffuser of a transonic centrifugal compressor

被引:32
|
作者
Ibaraki, Seiichi [1 ]
Matsuo, Tetsuya [1 ]
Yokoyama, Takao [1 ]
机构
[1] Mitsubishi Heavy Ind Co Ltd, Nagasaki Res & Dev Ctr, Nagasaki 8508610, Japan
来源
关键词
D O I
10.1115/1.2720505
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Transonic centrifugal compressors are used with high-load turbochargers and turboshaft engines. These compressors usually have a vaned diffuser to increase the efficiency and the pressure ratio. To improve the performance of such a centrifugal compressor, it is required to optimize not only the impeller but also the diffuser However the flow field of the diffuser is quite complex and unsteady because of the impeller located upstream. Although some research on vaned diffusers has been published, the diffuser flow is strongly dependent on the particular impeller exit flow, and some of the flow physics remain to be elucidated. In the research reported here, detailed flow measurements within a vaned diffuser were conducted using a particle image velocimetery (PIV). The vaned diffuser was designed with high subsonic inlet conditions marked by an inlet Mach number of 0.95 for the transonic compressor As a result, a complex three-dimensional flow with distortion between the shroud and the hub was observed. Also, unsteady flow accompanying the inflow of the impeller wake was confirmed. Steady computational flow analysis was performed and compared with the experimental results.
引用
收藏
页码:686 / 693
页数:8
相关论文
共 50 条
  • [31] Numerical Investigation of Rotating Stall in a Centrifugal Compressor With Vaned Diffuser
    Zhao, Yang
    Wang, Zhi-Heng
    Zhao, Jia-Yi
    Xi, Guang
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (04): : 776 - 783
  • [32] Numerical and experimental investigation of the efficiency of vaned diffuser of centrifugal compressor
    Obukhov, O.
    Smirnov, A.
    Gysak, O.
    8TH INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS, 2013, : 649 - +
  • [33] Investigation of Surge in a Transonic Centrifugal Compressor With Vaned Diffuser: Part II-Correlation With Subcomponent Characteristics
    Lou, Fangyuan
    Harrison, Herbert M.
    Brown, William J.
    Key, Nicole L.
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2023, 145 (05):
  • [34] INVESTIGATION OF SURGE IN A TRANSONIC CENTRIFUGAL COMPRESSOR WITH VANED DIFFUSER: PART 2-CORRELATION WITH SUBCOMPONENT CHARACTERISTICS
    Lou, Fangyuan
    Harrison, Herbert M.
    Brown, William J.
    Key, Nicole L.
    PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 10D, 2022,
  • [35] PIV measurements of the unsteady flow in the vaned diffuser of a centrifugal fan
    Shanghai Inst. of Elec. Power, Shanghai 200090, China
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2002, 38 (05): : 105 - 108
  • [36] Numerical Investigations of Unsteady Flow in a Centrifugal Pump with a Vaned Diffuser
    Petit, Olivier
    Nilsson, Hakan
    INTERNATIONAL JOURNAL OF ROTATING MACHINERY, 2013, 2013 (2013)
  • [37] Unsteady Behavior of Leading-edge Vortex and Diffuser Stall in a Centrifugal Compressor with Vaned Diffuser
    Nobumichi FUJISAWA
    Shotaro HARA
    Yutaka OHTA
    JournalofThermalScience, 2016, 25 (01) : 13 - 21
  • [38] UNSTEADY BEHAVIOR OF LEADING EDGE VORTEX AND DIFFUSER STALL INCEPTION IN A CENTRIFUGAL COMPRESSOR WITH VANED DIFFUSER
    Fujisawa, Nobumichi
    Hara, Shotaro
    Ohta, Yutaka
    Goto, Takashi
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING - 2014, VOL 1B: SYMPOSIA, 2014,
  • [39] Unsteady behavior of leading-edge vortex and diffuser stall in a centrifugal compressor with vaned diffuser
    Nobumichi Fujisawa
    Shotaro Hara
    Yutaka Ohta
    Journal of Thermal Science, 2016, 25 : 13 - 21
  • [40] Numerical Investigation of Negative Flow Characteristics in a Centrifugal Compressor With Vaned Diffuser and Internal Volute
    Qiao, Bing
    Ju, Yaping
    Zhang, Chuhua
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (07):