Explosive boiling of water in parallel micro-channels

被引：203

作者：

Hetsroni, G ^{[1
]}

Mosyak, A ^{[1
]}

Pogrebnyak, E ^{[1
]}

Segal, Z ^{[1
]}

机构：

[1] Technion Israel Inst Technol, Dept Mech Engn, IL-32000 Haifa, Israel

来源：

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW | 2005年 / 31卷 / 04期

关键词：

micro-channel; flow boiling; heat transfer; two-phase flow pattern; dryout;

D O I：

10.1016/j.ijmultiphaseflow.2005.01.003

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The objective of this study is to visualize the flow pattern and to measure heat transfer coefficient during explosive boiling of water in parallel triangular micro-channels. Tests were performed in the range of inlet Reynolds number 25-60, mass flux 95-340 kg/m(2)s, and heat flux 80-330 kW/m(2). The flow visualization showed that the behavior of long vapor bubbles, occurring in a micro-channel at low Reynolds numbers, was not similar to annular flow with interposed intermitted slugs of liquid between two long vapor trains. This process may be regarded as explosive boiling with periodic wetting and dryout. In the presence of two-phase liquid-vapor flow in the micro-channel, there are pressure drop oscillations, which increase with increasing vapor quality. This study shows strong dependence of the heat transfer coefficient on the vapor quality. The time when liquid wets the heated surface decreases with increasing heat flux. Dryout occurs immediately after venting of the elongated bubble. (c) 2005 Published by Elsevier Ltd.

引用

页码：371 / 392

页数：22

共 30 条

[1]

[Anonymous], 1995, GUID EXPR UNC MEAS

[2]

Collier J.G., 1994, CONVECTIVE BOILING C

[3] Heat transfer model for evaporation in microchannels. Part II: comparison with the database [J].

Dupont, V ;

Thome, JR ;

Jacobi, AM .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (14-16) :3387-3401

[4] Two-phase flow patterns in parallel micro-channels [J].

Hetsroni, G ;

Mosyak, A ;

Segal, Z ;

Pogrebnyak, E .

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2003, 29 (03) :341-360

[5] Surface temperature measurement of a heated capillary tube by means of an infrared technique [J].

Hetsroni, G ;

Gurevich, M ;

Mosyak, A ;

Rozenblit, R .

MEASUREMENT SCIENCE AND TECHNOLOGY, 2003, 14 (06) :807-814

[6] A uniform temperature heat sink for cooling of electronic devices [J].

Hetsroni, G ;

Mosyak, A ;

Segal, Z ;

Ziskind, G .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (16) :3275-3286

[7] Nonuniform temperature distribution in electronic devices cooled by flow in parallel microchannels [J].

Hetsroni, G ;

Mosyak, A ;

Segal, Z .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2001, 24 (01) :16-23

[8] Forced convection boiling in a microchannel heat sink [J].

Jiang, LA ;

Wong, M ;

Zohar, Y .

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2001, 10 (01) :80-87

[9] An extension of the flow boiling correlation to transition, laminar, and deep laminar flows in minichannels and microchannels [J].

Kandlikar, SG ;

Balasubramanian, P .

HEAT TRANSFER ENGINEERING, 2004, 25 (03) :86-93

[10] Fundamental issues related to flow boiling in minichannels and microchannels [J].

Kandlikar, SG .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2002, 26 (2-4) :389-407

← 1 2 3 →