Design space of shell and tube heat exchangers by an improved method

被引：0

作者：

Serna-González, M ^{[1
]}

Ponce-Ortega, JM ^{[1
]}

Castro-Montoya, AJ ^{[1
]}

Jiménez-Gutiérrez, A ^{[1
]}

机构：

[1] Univ Michaocana San Nicolas Hidalgo, Fac Ingn Quim, Morelia, Michoacan, Mexico

来源：

Energy-Efficient, Cost-Effective and Environmentally-Sustainable Systems and Processes, Vols 1-3 | 2004年

关键词：

heat transfer; shell and tube beat exchanger; Bell-Delaware method; optimization;

D O I：

暂无

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This paper presents an improved graphical technique for generating the feasible regions for shell and tube exchanger. designs under geometric and operational constraints. The proposed approach is based on the Bell-Delaware method for describing the shell-side flow with no simplification; this approach, therefore, has the same accuracy as the full Bell-Delaware method and can incorporate the entire range of geometric parameters of practical interest. Compared to a previous work, which uses the approximate Kern's correlations to describe the shell-side flow, the present one provides better accuracy for the thermal design of shell and tube heat exchangers with single phase fluids. One example is presented to show the application of the proposed method.

引用

页码：865 / 873

页数：9

共 50 条

[41] Computational fluid dynamic simulations to improve heat transfer in shell tube heat exchangers [J].

Syah, Rahmad ;

Bateni, Amir ;

Valizadeh, Kamran ;

Elveny, Marischa ;

Jahanian, Mehdi Shaeban ;

Ramdan, Dadan ;

Davarpanah, Afshin .

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2022, 20 (07) :749-764

[42] A general expression for the determination of the log mean temperature correction factor for shell and tube heat exchangers [J].

Fakheri, A .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2003, 125 (03) :527-530

[43] Systematic comparative analysis of Kern and Bell-Delaware methods for the design of shell-and-tube heat exchangers [J].

Di Bono, Giovanni ;

Corcione, Massimo ;

Quintino, Alessandro .

APPLIED THERMAL ENGINEERING, 2025, 278

[44] A NEW DESIGN METHOD FOR SEGMENTALLY BAFFLED HEAT-EXCHANGERS [J].

REPPICH, M ;

ZAGERMANN, S .

COMPUTERS & CHEMICAL ENGINEERING, 1995, 19 (19) :S137-S142

[45] An experimental study of shell-and-tube heat exchangers with continuous helical baffles [J].

Peng, B. ;

Wang, Q. W. ;

Zhang, C. ;

Xie, G. N. ;

Luo, L. Q. ;

Chen, Q. Y. ;

Zeng, M. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (10) :1425-1431

[46] Intelligent techniques for prediction characteristics of shell and tube heat exchangers: A comprehensive review [J].

Nazari, Mohammad Alhuyi ;

Ahmadi, Mohammad Hossein ;

Mukhtar, Azfarizal ;

Blazek, Vojtech ;

Prokop, Lukas ;

Misak, Stanislav .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 158

[47] Flow and heat transfer performance of shell-and-tube heat exchangers with fold helical baffles [J].

Wang S. ;

Xiao J. ;

Wang J. ;

Jian G. ;

Wen J. .

Huagong Xuebao/CIESC Journal, 2017, 68 (12) :4537-4544

[48] A MULTI-FIDELITY APPROACH FOR THE RELIABILITY ASSESSMENT OF SHELL AND TUBE HEAT EXCHANGERS [J].

Pidaparthi, Bharath ;

Missoum, Samy ;

Li, Peiwen .

PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 14, 2020,

[49] Thermo ecological optimization of shell and tube heat exchangers using NSGA II [J].

Reyes Rodriguez, Maida Barbara ;

Moya Rodriguez, Jorge Laureano ;

De Oliveira Fontes, Cristiano Hora .

APPLIED THERMAL ENGINEERING, 2019, 156 :91-98

[50] Application of Porous-Embedded shell and tube heat exchangers for the Waste heat Recovery Systems [J].

Zolfagharnasab, Mohammad Hossein ;

Pedram, Mona Zamani ;

Hoseinzadeh, Siamak ;

Vafai, Kambiz .

APPLIED THERMAL ENGINEERING, 2022, 211

← 1 2 3 4 5 →