Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition

被引：138

作者：

Albayrak, Onder ^{[1
]}

El-Atwani, Osman ^{[2
]}

Altintas, Sabri ^{[1
]}

机构：

[1] Bogazici Univ, Dept Mech Engn, TR-34342 Istanbul, Turkey

[2] Sabanci Univ, Dept Mat Sci & Engn, TR-34956 Istanbul, Turkey

来源：

SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 11期

关键词：

electrophoretic deposition; coating; hydroxyapatite; titanium dioxide; adhesion strength; decomposition;

D O I：

10.1016/j.surfcoat.2007.09.031

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Nanosized hydroxyapatite (HA) powders were prepared by a chemical precipitation method and electrophoretically deposited on Ti6A14V substrates. The powders were calcined before the deposition process in order to obtain crack-free coating surfaces. As an inner layer between Ti6A14V substrate and HA coating, nanosized titanium dioxide (TiO2) powders were deposited, using different coating voltages, in order to connect substrate and HA tightly. Moreover, this layer is considered to be acting as a diffusion barrier, reducing the HA decomposition due to ion migration from the metal substrate into the HA. After the sintering stage, adhesion strengths of coatings were measured by shear testing, phase changes were studied by X-ray diffraction, and coating morphology was analyzed through scanning electron microscopy observations. Results showed that usage of the TiO2 inner layer prevented HA decomposition. Furthermore, decreasing the voltage used in TiO2 deposition resulted in crack-free surfaces and increased adhesion strength of the overall coating. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：2482 / 2487

页数：6

共 28 条

[11] Characterization of elecrophoretically deposited nanocrystalline titanium dioxide films [J].

Lin, CK ;

Yang, TJ ;

Feng, YC ;

Tsung, TT ;

Sue, CY .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (10) :3184-3189

[12] Colloidal characterization and electrophoretic deposition of hydroxyapatite on titanium substrate [J].

Ma, J ;

Liang, CH ;

Kong, LB ;

Wang, C .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2003, 14 (09) :797-801

[13] Electrophoretic deposition of porous hydroxyapatite scaffold [J].

Ma, J ;

Wang, C ;

Peng, KW .

BIOMATERIALS, 2003, 24 (20) :3505-3510

[14] Effect of TiO2-Ag2O additives on the formation of calcium phosphate based functionally graded bioceramics [J].

Manjubala, I ;

Kumar, TSS .

BIOMATERIALS, 2000, 21 (19) :1995-2002

[15]

Mavis B, 2000, J AM CERAM SOC, V83, P989, DOI 10.1111/j.1151-2916.2000.tb01314.x

[16] Electrophoretic deposition of hydroxyapatite submicron particles at high voltages [J].

Mondragón-Cortez, P ;

Vargas-Gutiérrez, G .

MATERIALS LETTERS, 2004, 58 (7-8) :1336-1339

[17] Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis [J].

Nie, X ;

Leyland, A ;

Matthews, A .

SURFACE & COATINGS TECHNOLOGY, 2000, 125 (1-3) :407-414

[18]

POWERS RW, 1986, AM CERAM SOC BULL, V65, P1270

[19] Sintering atmosphere and temperature effects on hydroxyapatite coated type 316L stainless steel [J].

Sridhar, TM ;

Mudali, UK ;

Subbaiyan, M .

CORROSION SCIENCE, 2003, 45 (10) :2337-2359

[20] Electrophoretic coating of hydroxyapatite on titanium implants [J].

Stoch, A ;

Brozek, A ;

Kmita, G ;

Stoch, J ;

Jastrzebski, W ;

Rakowska, A .

JOURNAL OF MOLECULAR STRUCTURE, 2001, 596 :191-200

← 1 2 3 →