Flame-sprayed glaze coatings:: Effects of operating parameters and feedstock characteristics onto coating structures

被引：10

作者：

Arcondeguy, A. ^{[1
]}

Grimaud, A. ^{[1
]}

Denoirjean, A. ^{[1
]}

Gasgnier, G. ^{[2
]}

Huguet, C. ^{[2
]}

Pateyron, B. ^{[1
]}

Montavon, G. ^{[1
]}

机构：

[1] Univ Limoges, Fac Sci, CNRS, UMR 6638,SPCTS, F-87060 Limoges, France

[2] Imerys Tableware France, F-87700 Aix sur Vienne, France

来源：

JOURNAL OF THERMAL SPRAY TECHNOLOGY | 2007年 / 16卷 / 5-6期

关键词：

feedstock architecture; feedstock composition; flame spraying glaze; operating parameters; thermally sensitive substrate; thick layer;

D O I：

10.1007/s11666-007-9130-8

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Many substrates do not sustain the conventional glazing process (i.e., vitreous glazing) due to the relatively high temperature required by this treatment (i.e., up to 1400 degrees C in some cases) to fuse glazes after their application on the surface to be covered. Flame spraying could appear as a solution to circumvent this limitation and to avoid thermal decomposition of substrates. This contribution describes some structural attributes of glaze coatings manufactured by flame spraying. It also discusses the influence of the feedstock powder morphology and some of its physical properties on coating characteristics.

引用

页码：978 / 990

页数：13