Optimizing Non-Glare Zone Width of Adaptive Driving Beam (ADB) Using Fuzzy Logic Control

Adaptive driving beam (ADB) is an advanced vehicle forward-lighting system that automatically adapts its beam patterns to create a non-glare zone around vehicles, providing good long-range visibility for the driver without causing an uncomfortable glare for other road users. The performance of the ADB system is affected by the non-glare zone width. A narrow non-glare zone could create indirect glare in the side rearview mirrors of preceding vehicles during sharp turns while widening it results in poor road illumination. This research studies the trade-off relationship between glare and road illumination when altering the width of the non-glare zone in different driving scenarios. The study is conducted by using virtual driving simulation tools to simulate an ADB vehicle on four S-curve roads with minimum curvatures varying from 25 m to 100 m. Lux data are collected and processed using a fuzzy logic controller to mimic a human test driver to find the best non-glare zone width for balancing the trade-off. The research developed a design methodology allowing for a better understanding of the effect adjusting the width of the ADB non-glare zone has on ADB performance and improved ADB non-glare zone width optimum control system design.