Study on bending fretting fatigue damage in 17CrNiMo6 steel

被引：2
|
作者：
Peng, J. F. [1 ,2 ]
Jin, X. [1 ]
Xu, Z. B. [1 ]
Cai, Z. B. [1 ]
Zhang, X. Y. [1 ]
Zhu, M. H. [1 ]
机构：
[1] Southwest Jiaotong Univ, Tribol Res Inst, Tract Power State Key Lab, Chengdu 610031, Sichuan, Peoples R China
[2] Donghua Univ, State Key Lab Modificat Chem Fibers & Polymer Mat, Shanghai 200051, Peoples R China
来源：
INTERNATIONAL JOURNAL OF MODERN PHYSICS B | 2017年 / 31卷 / 16-19期
基金：
中国国家自然科学基金;
关键词：
Bending fretting fatigue; 17CrNiMo6; steel; microcrack; damage mechanism; ALLOY;
D O I：
10.1142/S0217979217440209
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Bending fretting fatigue behavior of 17CrNiMo6 alloy structural steel at room temperature was investigated under different bending and contact loads; and the S-N curve also was built up. The results showed that the S-N curve had a "C" shape. The bending fretting fatigue life was mainly dependent on the bending fatigue stress and fretting displacement. The limit of the specimens and the fretting fatigue life were dramatically decreased by fretting actions. The bending fretting fatigue damage changed under varied bending fatigue stress levels. When the wear first occurred, there is a lower bending fatigue stress; and with a higher bending fatigue load, microcracks were generated. However, some serious wear and surface delamination were observed under the highest fatigue load.
引用
收藏
页数：5
相关论文
共 47 条
  • [1] The effect of V-Nb on the growth of austenite grains in 17CrNiMo6 gear steel
    Zhao Yaping~(1) Wang Maoqiu~(2) Yuan Jiguo~(1) (1)Special Steel Branch
    BaosteelTechnicalResearch, 2008, (02) : 46 - 50
  • [2] On the damage mechanisms of bending fretting fatigue
    Peng, J. F.
    Zhu, M. H.
    Cai, Z. B.
    Liu, J. H.
    Zuo, K. C.
    Song, C.
    Wang, W. J.
    TRIBOLOGY INTERNATIONAL, 2014, 76 : 133 - 141
  • [3] Effects of Ultrasonic Impact Treatment Time on Surface Structure Refinement and Properties of 17CrNiMo6 Steel
    Ni Yong-heng
    Zhu You-li
    Hou Shuai
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2018, 46 (11): : 155 - 160
  • [4] Effect of ultrasonic surface rolling process by disparate static pressure on a carburized layer of 17CrNiMo6 steel
    Wang, Shuo
    Wang, Pingtuan
    Cui, Xiufang
    Jin, Guo
    Li, Jian
    Hu, Yuting
    Liu, Yufei
    Wu, Zilong
    Wu, Shengming
    MATERIALS CHEMISTRY AND PHYSICS, 2025, 329
  • [5] Bending Fretting Fatigue Damage Characteristics of CuMg0.4 Alloy
    Wei C.
    Peng J.
    Liu X.
    Liu J.
    Cai Z.
    Zhu M.
    Mocaxue Xuebao/Tribology, 2018, 38 (06): : 684 - 691
  • [6] Characteristics and damage mechanisms of bending fretting fatigue of materials
    Chowdhury, Mohammad Asaduzzaman
    Kowser, Md Arefin
    Shah, Quazi Md Zobaer
    Das, Suman
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2018, 27 (04) : 453 - 487
  • [7] Study on bending fretting fatigue behaviour of 15-5PH stainless steel with different fretting regimes
    Peng, Jinfang
    Zhao, Yiguang
    Chen, Ruilin
    Song, Yuan
    Zhong, Zhengye
    Liu, Jianhua
    Ren, Yanping
    Zhu, Minhao
    TRIBOLOGY INTERNATIONAL, 2024, 194
  • [8] Study on bending fretting fatigue damages of 7075 aluminum alloy
    Peng, Jin-fang
    Liu, Jian-hua
    Cai, Zhen-bing
    Shen, Ming-xue
    Song, Chuan
    Zhu, Min-hao
    TRIBOLOGY INTERNATIONAL, 2013, 59 : 38 - 46
  • [9] An experimental study on bending fretting fatigue characteristics of 316L austenitic stainless steel
    Peng, J. F.
    Song, C.
    Shen, M. X.
    Zheng, J. F.
    Zhou, Z. R.
    Zhu, M. H.
    TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1417 - 1426
  • [10] The effects of composite surface modification on the bending fatigue properties of 20CrNiMo steel
    Chen, Xiuyu
    Jiang, Wenjun
    Sun, Jie
    Li, Yalong
    Ma, Wenbin
    Xu, Zhilong
    Jiang, Qingshan
    Chen, Junying
    Li, Yi
    OPTICS AND LASER TECHNOLOGY, 2025, 180
12345