Study of Residual Stresses Distribution Generated from Milling of Magnesium Alloy Parts

被引：5

作者：

Chirita, Bogdan Alexandru ^{[1
]}

Tampu, Nicolae Catalin ^{[1
]}

机构：

[1] Vasile Alecsandri Univ Bacau, Bacau 600115, Romania

来源：

ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING | 2014年 / 657卷

关键词：

residual stress; magnesium alloy; surface quality; milling; MQL; dry cutting; SURFACE INTEGRITY; COMPONENTS; STEEL; DRY;

D O I：

10.4028/www.scientific.net/AMM.657.18

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Magnesium alloys exhibit a very good ratio of mechanical properties versus specific weight, thus making it an important choice for parts used in automotive, aeronautic and medical industry. The distribution of residual stress in the superficial layer of the material is regarded as one of the factors defining the surface quality of a machined part. It is therefore important to know this distribution as it is closely related to fatigue and corrosion resistance, especially for the parts working in aggressive environments (i.e. biomedical devices). The present paper focuses on the determination of the residual stresses induced in a magnesium alloy part processed by milling, and their effects on surface quality.

引用

页码：18 / 22

页数：5

共 14 条

[1] Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel
Ben Moussa, N.
Sidhom, H.
Braham, C.
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 64 (01) : 82 - 93
[2] Elementary studies on the inducement and relaxation of residual stress
Denkena, B.
Koehler, J.
Breidenstein, B.
Moerke, T.
[J]. 1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
[3] Grum J, 2010, SURFACE INTEGRITY IN MACHINING, P67, DOI 10.1007/978-1-84882-874-2_3
[4] Process mechanics and surface integrity by high-speed dry milling of biodegradable magnesium-calcium implant alloys
Guo, Y. B.
Salahshoor, M.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) : 151 - 154
[5] SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS
Guo, Y. B.
Li, W.
Jawahir, I. S.
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2009, 13 (04) : 437 - 470
[6] Surface integrity in material removal processes: Recent advances
Jawahir, I. S.
Brinksmeier, E.
M'Saoubi, R.
Aspinwall, D. K.
Outeiro, J. C.
Meyer, D.
Umbrello, D.
Jayal, A. D.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (02) : 603 - 626
[7] Meng-yang Q., 2013, INT J ADV MANUF TECH, V65, P355
[8] Powell BR, 2010, WOODHEAD PUBL MATER, P114, DOI 10.1533/9781845697822.1.114
[9] Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components
Pu, Z.
Outeiro, J. C.
Batista, A. C.
Dillon, O. W., Jr.
Puleo, D. A.
Jawahir, I. S.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 56 : 17 - 27
[10] Surface Integrity in Dry and Cryogenic Machining of AZ31B Mg Alloy with Varying Cutting Edge Radius Tools
Pu, Z.
Outeiro, J. C.
Batista, A. C.
Dillon, O. W., Jr.
Puleo, D. A.
Jawahir, I. S.
[J]. 1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19

← 1 2 →