MULTI-POINT OPTIMIZATION OF RECIRCULATION FLOW TYPE CASING TREATMENT IN CENTRIFUGAL COMPRESSORS

被引：0

作者：

Tun, Min Thaw ^{[1
]}

Sakaguchi, Daisaku ^{[1
]}

Numakura, Ryusuke ^{[2
]}

Wang, Baotong ^{[2
]}

机构：

[1] Nagasaki Univ, Grad Sch Engn, 1-14 Bunkyo Machi, Nagasaki 8528521, Japan

[2] IHI Corp, Isogo Ku, 1 Shin Nakahara Cho, Yokohama, Kanagawa 2358501, Japan

来源：

PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2D | 2016年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, an optimization design approach to recirculation flow type casing treatment for centrifugal compressors of turbochargers has been performed. The optimization code is a global exploring system based on a meta model assisted evolutionary algorithm. In this study, the objective functions of the optimization are adiabatic efficiency at design flow rate and near surge flow rate condition. Several optimized shapes on a "Pareto front" are selected in order to discuss the effect of casing treatment at the point of view of suppression of flow separation and a reduction of leading edge flow separation. The influence of optimized recirculation flow rate on the optimization output is also discussed. Increase in adiabatic efficiency of optimized casing treatment at near surge flow rate is discussed by the streamwise relative velocity distribution, reversed flow zone, static entropy distribution and flow incidence at impeller inlet. Detailed sensitivity of design variables on the adiabatic efficiency at design and off-design conditions was carried out.

引用

页数：12

共 12 条

[1] Casing Treatment and Inlet Swirl of Centrifugal Compressors
Chen, Hua
Lei, Vai-Man
[J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2013, 135 (04):
[2] Dickman H.-P., 2006, T ASME J TURBOMACHIN, V128, P445
[3] Fisher F. B., 1988, 880794 SAE
[4] Iwakiri Y., 2006, SPECIAL ISSUE TURBOC, V41, P15
[5] Turbomachinery blade design using a Navier-Stokes solver and artificial neural network
Pierret, S
Van den Braembussche, RA
[J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1999, 121 (02): : 326 - 332
[6] Sivagnanasundaram S., 2013, T ASME J TURBOMACHIN, V135
[7] Sivagnanasundaram S., 2014, T ASME J TURBOMACHIN, V136
[8] Effect of Recirculation Device With Counter Swirl Vane on Performance of High Pressure Ratio Centrifugal Compressor
Tamaki, Hideaki
[J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (05):
[9] Tun Min Thaw, 2015, P 12 INT S EXP COMP
[10] Tun MT, 2015, P 13 AS INT C FLUID

← 1 2 →