INVESTIGATION OF THE DYNAMIC BEHAVIOR OF MACHINE TOOLS DURING CUTTING BY OPERATIONAL MODAL ANALYSIS

被引：4

作者：

Berthold, J. ^{[1
]}

Kolouch, M. ^{[2
]}

Ragel, J. ^{[1
]}

Putz, M. ^{[1
,2
]}

机构：

[1] Tech Univ Chemnitz, Professorship Machine Tools & Forming Technol, Reichenhainer Str 70, Chemnitz 09126, Germany

[2] Fraunhofer Inst Machine Tools & Forming Technol I, Reichenhainer Str 88, Chemnitz 09126, Germany

来源：

MM SCIENCE JOURNAL | 2019年 / 2019卷

关键词：

Machine tool; Dynamic; Operational modal analysis; Measurement; IDENTIFICATION;

D O I：

10.17973/MMSJ.2019_11_2019054

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A common approach for the experimentally estimation of modal parameters is the Experimental Modal Analysis (EMA). EMA takes place in the standstill of the machine, consequently neglecting effects that only occur during the cutting process. Alternatively the Operational Modal Analysis (OMA) makes possible to investigate structures under operational loads and conditions. In this paper, a machine tool is investigated during cutting and the modal parameters are estimated by OMA, with several identification methods working in the frequency domain as well as in the time domain. These results are also contrasted to EMA to investigate the differences between cutting and standstill.

引用

页码：3078 / 3085

页数：8

共 50 条

[31] A method to obtain the in-process FRF of a machine tool based on operational modal analysis and experiment modal analysis [J].

Yili Peng ;

Bin Li ;

Xinyong Mao ;

Hongqi Liu ;

Chao Qin ;

Huanbin He .

The International Journal of Advanced Manufacturing Technology, 2018, 95 :3599-3607

[32] Operational modal identification of ultra-precision fly-cutting machine tools based on least-squares complex frequency-domain method [J].

Yuan, Jinchun ;

Li, Jiasheng ;

Wei, Wei ;

Liu, Pinkuan .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (7-8) :4385-4394

[33] Cutting fluid influence on thermal behavior of 5-axis machine tools [J].

Mayr, Josef ;

Gebhardt, Michael ;

Massow, Benjamin B. ;

Weikert, Sascha ;

Wegener, Konrad .

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 :395-400

[34] Dynamic Characterization of Glazed Partition Walls by Operational Modal Analysis Technique [J].

De Angelis, Alessandra ;

Maddaloni, Giuseppe ;

Pecce, Maria Rosaria .

SEISMIC ISOLATION, ENERGY DISSIPATION AND ACTIVE VIBRATION CONTROL OF STRUCTURES, 17WCSI 2022, 2023, 309 :782-790

[35] Operational modal analysis of non-self-adjoint dynamic system [J].

Chen W. ;

Song H.-W. .

Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2018, 31 (05) :772-779

[36] Dynamic Characterization of the Little Belt Suspension Bridge by Operational Modal Analysis [J].

Christensen, Silas S. ;

Andersen, Michael S. ;

Brandt, Anders .

DYNAMICS OF CIVIL STRUCTURES, VOL 2, 2019, :17-22

[37] Operational Modal Analysis for Dynamic Characterization of a Ro-Lo Ship [J].

Orlowitz, Esben ;

Brandt, Anders .

JOURNAL OF SHIP RESEARCH, 2014, 58 (04) :216-224

[38] Investigation of the concrete parameters of existing RC buildings by operational modal analysis [J].

Aras, Fuat .

BULLETIN OF EARTHQUAKE ENGINEERING, 2023, 21 (13) :5893-5914

[39] Infill wall effects on the dynamic characteristics of RC frame systems via operational modal analysis [J].

Komur, Mehmet A. ;

Kara, Mehmet E. ;

Deneme, Ibrahim O. .

STRUCTURAL ENGINEERING AND MECHANICS, 2020, 74 (01) :121-128

[40] The use of operational modal analysis in the process of modal parameters identification in a rotating machine supported by roller bearings [J].

Storti, Gustavo ;

Machado, Tiago .

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (02) :471-480

← 1 2 3 4 5 →