共 50 条
Hardening and microstructural evolution in A533B steels under high-dose electron irradiation
被引:35
|作者:
Fujii, K
Fukuya, K
Nakata, N
Hono, K
Nagai, Y
Hasegawa, M
机构:
[1] Inst Nucl Safety Syst, Fukui 9191205, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050045, Japan
[3] Tohoku Univ, Ibaraki 3111313, Japan
关键词:
D O I:
10.1016/j.jnucmat.2004.12.008
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
Commercial A533B steels (0.12, 0.16 wt% Cu) irradiated at 290 degrees C up to 22 mdpa with 5 MeV electrons were examined by hardness measurements, positron lifetime spectroscopy, the coincidence Doppler broadening (CDB) technique and three-dimensional atom probe microanalysis (3DAP), The radiation-induced hardening increased with electron dose and lay on the same trend of neutron-induced hardening within data scatter. CDB measurements revealed that clustering of Cu atoms occurred at doses over I mdpa and proceeded with increasing dose. 3DAP results showed that well-defined Cu-rich precipitates with a diameter of less than 2 nm were formed at doses of 10 and 22 mdpa. The precipitates had a shell structure consisting of a Cu-Fe core region and a surrounding Mn-Ni-Si shell, which are similar to those formed under neutron irradiation. The size and number density of the precipitates were consistent with previous neutron data. Positron lifetime spectroscopy showed that no microvoids were formed. The electron irradiation caused almost the same hardening efficiency and evolution of Cu-rich precipitates as those under neutron irradiation on a dpa basis. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:247 / 258
页数:12
相关论文