Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy

被引：51

作者：

Moshwan, Raza ^{[1
,2
]}

Rahmat, Sahifulddin M. ^{[1
,2
]}

Yusof, Farazila ^{[1
,2
]}

Hassan, Mohsen A. ^{[1
,2
,3
]}

Hamdi, Mohd ^{[1
,2
]}

Fadzil, Mohd ^{[1
,2
]}

机构：

[1] Univ Malaya, Fac Engn, Dept Mech Engn, Kuala Lumpur 50603, Malaysia

[2] Univ Malaya, AMMP Ctr, Ctr Adv Mfg & Mat Proc, Kuala Lumpur 50603, Malaysia

[3] Assiut Univ, Dept Mech Engn, Assiut, Egypt

来源：

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2015年 / 106卷 / 03期

关键词：

Friction stir welding; AA; 7075; Polycarbonate; Mechanical interlocking; MECHANICAL-PROPERTIES; LAP JOINTS; PARAMETERS; TITANIUM; STEEL; MICROSTRUCTURE; STRENGTH; AL; EVOLUTION; POLYMERS;

D O I：

10.3139/146.111172

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this paper, the effects of process parameters, such as the tool rotational and traverse speeds, on temperature evolution and the microstructural and mechanical properties of dissimilar friction stir welding between 3 mm thick AA 7075 aluminum alloy and polycarbonate (PC) plates were investigated. The tool rotational and traverse speeds were varied from 3 000 to 3 500 rpm and 50 to 150 mm min(-1), respectively. The joint fabricated at 3 250 rpm and 100 mm min(-1) yielded a highest tensile load of 586 N. Microstructural analysis of the stir zone revealed an interlock phenomenon, the transportation of AA 7075 in polycarbonate, and the absence of ceramic-type (carbide, hydride or oxide) compounds. Microhardness (HV) measurement on the weld zone showed an uneven distribution due to the complicated microstructure of the welded joint. The maximum temperatures of 164 degrees C and 66 degrees C were obtained at 3 250 rpm and 100 mm min(-1) at a distance of 5 mm away from the welding centerline in the AA 7075 and PC side, respectively.

引用

页码：258 / 266

页数：9

共 50 条

[31] Defect features and mechanical properties of friction stir lap welded dissimilar AA2024-AA7075 aluminum alloy sheets
Song, Youbao
Yang, Xinqi
Cui, Lei
Hou, Xiaopeng
Shen, Zhikang
Xu, Yan
MATERIALS & DESIGN, 2014, 55 : 9 - 18
[32] Preliminary study on the feasibility of friction stir welding in 7075 aluminium alloy and polycarbonate sheet
Rahmat, S. M.
Hamdi, M.
Yusof, F.
Moshwan, R.
MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 515 - 519
[33] Friction stir welding of dissimilar aluminum alloys
Cook, R
Handboy, T
Fox, SL
Arbegast, W
Friction Stir Welding Processing III, 2005, : 35 - 42
[34] FRICTION STIR SPOT WELDING OF AA6016 ALUMINUM ALLOY
Yuan, W.
Mishra, R. S.
Webb, S. S.
Chen, Y. L.
Gayden, X. Q.
Carlson, B.
Grant, G. J.
FRICTION STIR WELDING AND PROCESSING V, 2009, : 205 - +
[35] Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters
Guo, J. F.
Chen, H. C.
Sun, C. N.
Bi, G.
Sun, Z.
Wei, J.
MATERIALS & DESIGN, 2014, 56 : 185 - 192
[36] Grey relational analysis of friction stir welding parameters for the development of dissimilar joints between AA6082 and AA7075
Ramakrishna, M. V. A.
Srinivas, K.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 954 - 965
[37] Microstructure of dissimilar joint interface of magnesium alloy and aluminum alloy by friction stir welding
Hirano, Satoshi
Okamoto, Kazutaka
Doi, Masayuki
Okamura, Hisanori
Inagaki, Masahisa
Aono, Yasuhisa
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2003, 21 (04): : 539 - 545
[38] Strength mismatch mechanism on friction stir welding joint of 7075 aluminum alloy
朱浩
董少康
赵熠朋
王晨霁
王军
朱绍金
China Welding, 2021, 30 (01) : 30 - 36
[39] Experiment Study and Simulation for Friction Stir Welding Process of 7075 Aluminum Alloy
Feng, Ying-Ying
Zhao, Shuang
Liu, Zhao-Song
Luo, Zong-An
Dongbei Daxue Xuebao/Journal of Northeastern University, 2021, 42 (03): : 340 - 346
[40] An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)
Derazkola, Hamed Aghajani
Simchi, Abdolreza
THIN-WALLED STRUCTURES, 2019, 135 : 376 - 384

← 1 2 3 4 5 →