The Effect of a Small Volume Liquid Phase on the Hot Deformation in the BaPbO3/2024Al Composite

被引：0
作者：
Fan, G. H. [1 ]
Zheng, Z. Z. [1 ]
Pang, J. C. [1 ]
Geng, L. [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
PRICM 7, PTS 1-3 | 2010年 / 654-656卷
关键词：
Metal matrix composite; hot deformation; liquid phase; microstructure; ALUMINUM-ALLOY COMPOSITES; MATRIX COMPOSITES; BEHAVIOR; SUPERPLASTICITY; TEMPERATURES; BI2O3;
D O I：
10.4028/www.scientific.net/MSF.654-656.2684
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this paper, BaPbO(3)(5Vol.%)/2024Al composite was fabricated by powder metallurgy method. Nanosized Pb particles were formed from the in-situ reaction between BaPbO(3) and 2024Al, and mainly distributed homogeneously inside grains. The hot compression deformation of the composite at different temperatures was performed. The microstructure evolution of the 2024Al matrix and dynamic mechanical analysis (DMA) of the composite were made to investigate the effect of liquid Pb on the hot deformation. The results show that the presence of the liquid phase reduces deformation resistance by decreasing dislocation pileups, and simultaneous decrease in Young 's modulus of the composite.
引用
收藏
页码：2684 / 2687
页数：4
相关论文
共 50 条
[21]   Constitutive flow behavior and hot workability of powder metallurgy processed 20 vol.%SiCP/2024Al composite [J].
Shao, J. C. ;
Xiao, B. L. ;
Wang, Q. Z. ;
Ma, Z. Y. ;
Liu, Y. ;
Yang, K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30) :7865-7872
[22]   Microstructure and mechanical behaviors of Ti3AlC2 triggered in-situ Al3Ti and TiC reinforced 2024Al composite [J].
Wang, Yuanbo ;
Huang, Zhenying ;
Hu, Wenqiang ;
Yu, Qun ;
Wang, Hongjie ;
Li, Xue ;
Dastan, Davoud ;
Zhou, Yang .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 :289-299
[23]   Enhanced hot deformation property of Al 2 O 3 /Cu - Cr composite fabricated by internal oxidation [J].
Xu, Guoyang ;
Guo, Xiuhua ;
Li, Shaolin ;
Song, Kexing ;
Song, Hao ;
Su, Hui .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 899
[24]   Microstructure and tensile properties of Si3N4p/2024Al composite fabricated by pressure infiltration method [J].
Xiu, Ziyang ;
Yang, Wenshu ;
Chen, Guoqing ;
Jiang, Longtao ;
Ma, Kang ;
Wu, Gaohui .
MATERIALS & DESIGN, 2012, 33 :350-355
[25]   Microstructure characterization and enhanced mechanical properties of quasi-continuous network structured Ti3AlC2-Al3Ti/2024Al composite [J].
Zhuang, Weici ;
Huang, Zhenying ;
Hu, Wenqiang ;
Wang, Yuanbo ;
Wu, Youbo ;
Yu, Qun ;
Wang, Hongjie ;
Li, Xue .
MATERIALS CHARACTERIZATION, 2022, 191
[26]   Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region [J].
Ji, Xiankun ;
Yu, Hong ;
Guo, Baoqi ;
Jiang, Fulin ;
Fu, Dingfa ;
Teng, Jie ;
Zhang, Hui ;
Jonas, John J. .
MATERIALS & DESIGN, 2020, 188
[27]   Aging and thermal expansion behavior of Si3N4p/2024Al composite fabricated by pressure infiltration method [J].
Chen Guo-qing ;
Yang Wen-shu ;
Ma Kang ;
Hussain, Murid ;
Jiang Long-tao ;
Wu Gao-hui .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 :S262-S273
[28]   Hot workability and deformation mechanisms in Mg/nano-Al2O3 composite [J].
Prasad, Y. V. R. K. ;
Rao, K. P. ;
Gupta, M. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (7-8) :1070-1076
[29]   The effect of lateral off- set on the tensile strength and fracture of dissimilar friction stir welds, 2024Al alloy and 17% SiC/2124Al composite [J].
Cioffi, Florencia ;
Ibanez, Joaquin ;
Fernandez, Ricardo ;
Gonzalez-Doncel, Gaspar .
MATERIALS & DESIGN, 2015, 65 :438-446
[30]   Microstructure and mechanical properties of in situ TiB2.TiAl3/2024Al composite subjected to multidirectional forging [J].
Chen, Qiang ;
Geng, Haoyu ;
Zhang, Hongming ;
Li, Xin ;
Chen, Gang .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 :2827-2840
12345