Improvement of Strength on Joint of GFRP/Al-5083 Joint Using Epoxy/Al-Powder Adhesive for Electric Vehicle Car Body

被引：0
|
作者：
Diharjo, Kuncoro [1 ]
Firdaus, Yohanes [1 ]
Raharjo, Wijang Wisnu [1 ]
Tjahjana, D. Danardono Dwi Prija [1 ]
机构：
[1] Sebelas Maret Univ, Fac Engn, Dept Mech Engn, Surakarta, Indonesia
来源：
2014 INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING AND COMPUTER SCIENCE (ICEECS) | 2014年
关键词：
aluminum powder; surface pattern; epoxy; shear strength; single lap joint; electric car;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
The objective of this research is to investigate the optimum aluminum powder content in epoxy as adhesive and surface pattern on shear strength of single lap joint between aluminum-GFRP composite for electric car application. The shear strength was determined by utilizing the single-lap shear test. The aluminum powder content was varied in 0, 2.5, 5, 7.5, 10 and 12.5(w/w), whereas the surface pattern varied in 5 type of pattern. Experimental results showed that the aluminum powder-epoxy adhesive has the maximum shear strength at 12.5% of aluminum powder content. However, for the use of the surface pattern on adherend shows slight differences of shear strength. The adhesive failure mode occurred the joining using aluminum powder-epoxy as mixed mode.
引用
收藏
页码：193 / 196
页数：4
相关论文
共 12 条
  • [1] Adhesive Nanosilica/Aluminium Powder - Epoxy for Joint Application on Composite Car Body of Electrical Vehicle
    Diharjo, Kuncoro
    Afandi, Ridwan
    Purwanto, Agus
    Suharty, Neng Sri
    Jihad, Bagus Hayatul
    Nasiri, Syah Johan A.
    Firdaus, Yohanes
    Tjahjana, D. Danardono D. P.
    PROCEEDINGS OF THE 2013 JOINT INTERNATIONAL CONFERENCE ON RURAL INFORMATION & COMMUNICATION TECHNOLOGY AND ELECTRIC-VEHICLE TECHNOLOGY (RICT & ICEV-T), 2013,
  • [2] Effect of Adhesive Thickness and Surface Treatment on Shear Strength on Single Lap Joint Al/CFRP using Adhesive of Epoxy/Al Fine Powder
    Diharjo, Kuncoro
    Anwar, Miftahul
    Tarigan, Roy Aries P.
    Rivai, Ahmad
    6TH NANOSCIENCE AND NANOTECHNOLOGY SYMPOSIUM (NNS2015), 2016, 1710
  • [3] Stress Analysis of Single Lap Joint Using Al 6063 and GFRP as Adherents with Bond 108 as Adhesive
    Nithesh Bhaskar N.
    Venkatesh M.K.
    Journal of The Institution of Engineers (India): Series D, 2024, 105 (01) : 65 - 76
  • [4] Numerical and experimental analysis of Al/GFRP joint for optimization of adhesive bonding strength using response surface method by considering surface patterning of the joints
    Samadi, Mohammad Reza
    Alaei, Mohammad Hossein
    Jam, Jafar Eskandari
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2025, 136
  • [5] Effect of Dwell Time on Joint Interface Microstructure and Strength of Dissimilar Friction Stir Spot-Welded Al-5083 and St-12 Alloy Sheets
    Fereiduni, Eskandar
    Movahedi, Mojtaba
    Kokabi, Amir Hossein
    Najafi, Hossein
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (04): : 1744 - 1758
  • [6] Effect of Dwell Time on Joint Interface Microstructure and Strength of Dissimilar Friction Stir Spot-Welded Al-5083 and St-12 Alloy Sheets
    Eskandar Fereiduni
    Mojtaba Movahedi
    Amir Hossein Kokabi
    Hossein Najafi
    Metallurgical and Materials Transactions A, 2017, 48 : 1744 - 1758
  • [7] Experimental and numerical assessment of the effect of transverse reinforcing of AL-GFRP single lap adhesive joint using Z-pins under tensile loading
    Mirzaei, A.
    Darbandi, A. H.
    Ramzaninezhad, M.
    Rezvaninasab, M.
    Alaei, M. H.
    JOURNAL OF ADHESION, 2022, 98 (16): : 2662 - 2688
  • [8] Improvement of joint strength of SiCp/Al metal matrix composite in transient liquid phase bonding using Cu/Ni/Cu film interlayer
    Chen, Rongfa
    Zuo, Dunwen
    Wang, Min
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2006, 22 (03) : 291 - 294
  • [9] Improvement of the bonding strength of Al/Cu transition joint made by single-shot explosive welding technique using Cu intermediate plate
    Izuma, Takeshi
    Hokamoto, Kazuyuki
    Fujita, Masahiro
    Niwatsukino, Toru
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1994, 12 (01): : 77 - 81
  • [10] Improvement of joint strength of SiCp/Al metal matrix composite in transient liquid phase bonding using Cu/Ni/Cu film interlayer
    Chen, Rongfa
    Zuo, Dunwen
    Wang, Min
    Journal of Materials Science and Technology, 2006, 22 (03): : 291 - 294
12