On the interface between porcelain and titanium

被引：3

作者：

Guo, Litong ^{[1
]}

Gao, Jiqiang ^{[1
]}

Liu, Xiaochen ^{[2
]}

Guo, Tianwen ^{[3
]}

He, Zengying ^{[1
]}

机构：

[1] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China

[2] Zhejiang Univ, Affiliated Hosp Stomatol, Dept Prosthodent, Hangzhou PT-310006, Peoples R China

[3] Fourth Mil Med Univ, Xian 710032, Peoples R China

来源：

HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2 | 2008年 / 368-372卷

关键词：

porcelain-fused-to-metal; titanium; three-point flexure test; corrosion; ADHERENCE; ALLOY;

D O I：

10.4028/www.scientific.net/KEM.368-372.1618

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Low-fusing dental porcelain was fused on titanium surface. The adhesion between the titanium and porcelain was evaluated by three-point flexure test. It was shown that the failure of the titanium-porcelain predominantly occurred at the alloy-oxide interface. Rutile phase was present on the interface debonding from porcelain. The influence of corrosion on bonding strength was also investigated. The results suggested that, after being immersed in artificial saliva with pH of 2.7, 5.4 and 7.0. no decreasing of the bonding strength of Ti-porcelain occurred.

引用

页码：1618 / +

页数：2

共 12 条

[1] OXIDE ADHERENCE AND PORCELAIN BONDING TO TITANIUM AND TI-6A1-4V ALLOY [J].

ADACHI, M ;

MACKERT, JR ;

PARRY, EE ;

FAIRHURST, CW .

JOURNAL OF DENTAL RESEARCH, 1990, 69 (06) :1230-1235

[2]

[Anonymous], 1999, 9693 ISO

[3] EFFECT OF FIRING TEMPERATURE AND WATER EXPOSURE ON CRACK-PROPAGATION IN UNGLAZED PORCELAIN [J].

ANUSAVICE, KJ ;

LEE, RB .

JOURNAL OF DENTAL RESEARCH, 1989, 68 (06) :1075-1081

[4] Porcelain adherence to dental cast CP titanium: effects of surface modifications [J].

Cai, Z ;

Bunce, N ;

Nunn, ME ;

Okabe, T .

BIOMATERIALS, 2001, 22 (09) :979-986

[5] Ceramic bonding to a dental gold-titanium alloy [J].

Fischer, J .

BIOMATERIALS, 2002, 23 (05) :1303-1311

[6]

KAPPERT HF, 1994, DTSCH ZAHNARZTL Z, V49, P716

[7] Thick rutile layer on titanium for tribological applications [J].

Krishna, D. Siva Rama ;

Brama, Y. L. ;

Sun, Y. .

TRIBOLOGY INTERNATIONAL, 2007, 40 (02) :329-334

[8]

MANOEL G, 2003, DENT MATER, V19, P790

[9] Preparation and characterisation of titania/hydroxyapatite composite coatings obtained by sol-gel process [J].

Milella, E ;

Cosentino, F ;

Licciulli, A ;

Massaro, C .

BIOMATERIALS, 2001, 22 (11) :1425-1431

[10]

Wang RR, 1999, J BIOMED MATER RES, V46, P262, DOI 10.1002/(SICI)1097-4636(199908)46:2<262::AID-JBM16>3.0.CO

← 1 2 →