Nitrogen Effects in Dual-Phase Sheet Steel

被引:0
|
作者
Brown, Tyson W. [1 ]
Speer, John G. [1 ]
Matlock, David K. [1 ]
Haezebrouck, Dennis M. [2 ]
机构
[1] Colorado Sch Mines, Adv Steel Proc & Prod Res Ctr, Golden, CO 80401 USA
[2] US Steel Res & Technol Ctr, Munhall, PA 15120 USA
关键词
PEARLITE NODULES; PLATE STEEL;
D O I
10.1007/s11661-011-0776-y
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of variations in free nitrogen content on the microstructure and room-temperature tensile properties of laboratory processed dual-phase (DP) sheet steels with a base composition (wt pct) of 0.1C-2.0Mn-0.2Mo-0.2Cr were evaluated. Systematic variations in aluminum and nitrogen content along with coiling temperature were used to create a range of interstitial nitrogen contents and microstructure variations after hot rolling. Two cold rolling reductions of 40 and 70 pct were applied before intercritical annealing. Tensile properties show increasing strength and decreasing total elongation with increasing nitrogen content. Increasing the coiling temperature and adding Al diminished the N effects, while increased cold reduction increased tensile strength in some instances. Microstructural observations indicate an increase in martensite fraction with increased prior cold reduction, while increased coiling temperature decreased the fraction of martensite.
引用
收藏
页码:3611 / 3619
页数:9
相关论文
共 50 条
  • [1] Nitrogen Effects in Dual-Phase Sheet Steel
    Tyson W. Brown
    John G. Speer
    David K. Matlock
    Dennis M. Haezebrouck
    Metallurgical and Materials Transactions A, 2011, 42 : 3611 - 3619
  • [2] MECHANICAL ANISOTROPY OF A DUAL-PHASE STEEL SHEET
    SUGIMOTO, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1291 - 1291
  • [3] Failure characteristics of a dual-phase steel sheet
    Bjorklund, Oscar
    Nilsson, Larsgunnar
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (06) : 1190 - 1204
  • [4] DAMAGE IN SHEET FORMING OF A DUAL-PHASE STEEL
    ZHANG, YZ
    HU, XY
    HUANG, JQ
    RES MECHANICA, 1990, 31 (01): : 35 - 48
  • [5] Uniaxial Ratcheting Behavior of Dual-Phase Steel Sheet
    Partha Sarathi De
    Jayanta Kumar Mahato
    Amrita Kundu
    P. C. Chakraborti
    M. Shome
    Journal of Materials Engineering and Performance, 2018, 27 : 3688 - 3698
  • [6] FATIGUE OF A HIGHLY PRESTRAINED DUAL-PHASE SHEET STEEL
    GUSTAVSSON, A
    MELANDER, A
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1995, 18 (02) : 201 - 210
  • [7] Uniaxial Ratcheting Behavior of Dual-Phase Steel Sheet
    Sarathi, De Partha
    Mahato, Jayanta Kumar
    Kundu, Amrita
    Chakraborti, P. C.
    Shome, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (07) : 3688 - 3698
  • [8] Fatigue of a highly prestrained dual-phase sheet steel
    Gustavsson, A.
    Melander, A.
    Fatigue and Fracture of Engineering Materials and Structures, 1995, 18 (02): : 201 - 210
  • [9] Numerical Determination of the Damage Parameters of a Dual-phase Sheet Steel
    West, Ole
    Lian, Junhe
    Muenstermann, Sebastian
    Bleck, Wolfgang
    ISIJ INTERNATIONAL, 2012, 52 (04) : 743 - 752
  • [10] DEVELOPMENT OF AS-HOT-ROLLED DUAL-PHASE STEEL SHEET
    KATO, T
    HASHIGUCHI, K
    TAKAHASHI, I
    IRIE, T
    OHASHI, N
    JOURNAL OF METALS, 1980, 32 (12): : 30 - 30