CUTTING-TOOL PERFORMANCE IN THE END MILLING OF CARBON-FIBER-REINFORCED PLASTICS

被引：2
作者：
Bilek, Ondrej [1 ]
Rusnakova, Sona [1 ]
Zaludek, Milan [1 ]
机构：
[1] TBU Zlin, Fac Technol, Nam TGM 5555, Zlin 76001, Czech Republic
来源：
MATERIALI IN TEHNOLOGIJE | 2016年 / 50卷 / 05期
关键词：
CFRP; composites; end mill; surface quality; cutting forces; SURFACE INTEGRITY;
D O I：
10.17222/mit.2015.153
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Carbon-fiber-reinforced plastics (CFRPs) are no longer the exclusive domain of aerospace industries and nowadays find more applications in the automotive and consumer industries. The growing volume of these materials increases the need for their efficient machining. However, the machinability of CFRPs is a rather complex task due to the heterogeneity and the considerable number of parameters influencing the cutting process. The cutting tool has long been recognized as an important factor influencing both surface quality and dimensional accuracy. Hence, in this paper, tool performance is investigated in the end milling of CFRPs. The effect of tool geometry and coatings on the cutting forces, dimensional accuracy and surface quality were experimentally examined for side and slot milling.
引用
收藏
页码：819 / 822
页数：4
相关论文
共 12 条
  • [1] Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments
    Davim, JP
    Reis, P
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 160 (02) : 160 - 167
  • [2] Factors affecting workpiece surface integrity in slotting of CFRP
    El-Hofy, M. H.
    Soo, S. L.
    Aspinwall, D. K.
    Sim, W. M.
    Pearson, D.
    Harden, P.
    [J]. 1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
  • [3] Prediction of Process Forces and Stability of End Mills with Complex Geometries
    Grabowski, R.
    Denkena, B.
    Koehler, J.
    [J]. 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 : 119 - 124
  • [4] Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs) - An experimental study
    Hintze, Wolfgang
    Hartmann, Dirk
    Schuette, Christoph
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (15) : 1719 - 1726
  • [5] Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates
    Karpat, Yigit
    Bahtiyar, Onur
    Deger, Burak
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 56 : 79 - 93
  • [6] Legutko Stanislaw, 2014, Manufacturing Technology, V14, P50
  • [7] Design and Test of a Multitooth Tool for CFRP Milling
    Lopez De lacalle, L. N.
    Lamikiz, A.
    Campa, F. J.
    FDZ. Valdivielso, A.
    Etxeberria, I.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (26) : 3275 - 3290
  • [8] Masek P., 2013, MM PRUMYSLOVE SPEKTR, V6, P60
  • [9] Influence of milling process parameters on the surface integrity of CFRP
    Pecat, Oliver
    Rentsch, Ruediger
    Brinksmeier, Ekkard
    [J]. FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 466 - 470
  • [10] Rusnakova S, 2014, MANUFACTURING TECHNO, V4, P607
12