Drug release from reservoir pellets compacted with some excipients of different physical properties

The aim of the present study was to investigate the influence of the size and the porosity of excipient microcrystalline cellulose (MCC) particles on the densification and the deformation during compaction and the consequent effect on the drug release from reservoir pellets. Drug pellets consisting of salicylic acid and microcrystalline cellulose were prepared by extrusion-spheronisation and spray-coated with ethyl cellulose (ethanol solution). Excipient pellets of different size and porosity were prepared by extrusion-spheronisation or direct spheronisation. Five binary mixtures of reservoir pellets and excipient particles were prepared in the proportion 1:7 and lubricated. After compaction the reservoir pellets were retrieved and analysed to determine the intragranular porosity, surface area, shape and drug release. The reservoir pellets were shown to undergo extensive deformation and densification during compaction, resulting in a preserved or even prolonged drug release time. The mode of deformation of the reservoir pellets seems to be critical for the compression-induced change in drug release. Formation of large indents has a negative effect on the release time, while the use of small particles or small deformable agglomerates has a protective effect. We also hypothesize that the coating structure changes during compaction and the final structure of the coating is the net effect of two parallel processes, one reducing and one prolonging the drug transport time across the coating. (C) 2003 Elsevier B.V. All rights reserved.