In situ crystallization of bacterial cellulose - III. Influences of different polymeric additives on the formation of microfibrils as revealed by transmission electron microscopy

Effects of polymer additives on the formation of microfibrils of bacterial cellulose have been examined by transmission electron microscopy, Among additives with different degrees of polymerization (DP) or substitution (DS), carboxymethyl cellulose sodium salt (CMC) with DP = 80 and DS = 0.57 is the most effective in producing separate, smaller-size microfibrils. By increasing the concentration of this CMC from 0.1 to 1.5%, the percentage of microfibrils measuring 3-7 nm wide is increased and levels off at around 1.0%. Other polymer additives such as xyloglucan are less effective than CMC in producing microfibrils with smaller sizes and the resulting microfibrils still tend to aggregate. The number of charged substituents and the molecular weight seem to be important factors in the production of highly separate smaller-size microfibrils. The reduction in average microfibril size is well correlated to the decrease in mass fraction of cellulose I-alpha in bacterial cellulose crystals. On the basis of these results, the mechanism of the crystallization of celluloses I-alpha and I-beta is discussed, The effect of colony types, smooth and rough, on the formation of microfibrils in the presence of CMC is also described. 0969-0239 (C) 1998 Blackie Academic & Professional.