Preparation and Characterization of Poly (lactic acid) Toughened by SEBS-MAH

被引:0
|
作者
Liu Mi-mi [1 ]
Wei Fa-yun [1 ]
Zhang Yu [1 ]
机构
[1] Donghua Univ, Coll Mat Sci & Engn, State Key Lab Modificat Chem Fiber & Polymer Mat, Shanghai 201620, Peoples R China
关键词
poly (lactic acid); blend; toughness; SEBS-MAH;
D O I
暂无
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Polylatic acid (PLA) is used in biology widely, such as suture, medical carrier and bone immobilizing material. But the toughness of PLA is poor. In this article, we used styrene-ethylene-butylene-styrene grafted by maleic anhydride (SEBS-MAH) to improve the toughness of PLA. Mechanical properties of the blends were tested with different SEBS- MAH contents. The tensile strength decreased with the SEBS-MAH contents increasing, but the elongation at break increased significantly. The tensile strength of the blends with SEBS- MAH was higher than the blends with SEBS. Based on the thermogravimetic analysis, we found the degradation temperatures of the blends with SEBS- MAH were higher than the blends with SEES. It means the maleic anhydride improves the interface properties between PLA and SEBS. We also used scanning electron microscope to prove the phenomena.
引用
收藏
页码:39 / 42
页数:4
相关论文
共 50 条
  • [1] Water Absorption and Hygrothermal Aging Behaviors of SEBS-g-MAH Toughened Poly(lactic acid)/Halloysite Nanocomposites
    Tham, W. L.
    Ishak, Z. A. Mohd
    Chow, W. S.
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2014, 53 (05) : 472 - 480
  • [2] Synergistic toughening of polypropylene by thermoplastic starch acetate and SEBS-MAH
    Chen, Youxu
    Xu, Xiaoyu
    Hu, Yuexin
    Han, Yuanyuan
    Zhao, Fengyang
    Yan, Nan
    Jiang, Wei
    Zhao, Guiyan
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (25)
  • [3] Preparation and characterization of poly(lactic acid)/starch composites toughened with epoxidized soybean oil
    Xiong, Zhu
    Yang, Yong
    Feng, Jianxiang
    Zhang, Xiaomin
    Zhang, Chuanzhi
    Tang, Zhaobin
    Zhu, Jin
    CARBOHYDRATE POLYMERS, 2013, 92 (01) : 810 - 816
  • [4] Compatibilization of PP/SEBS-MAH blends by grafting Glycidyl Methacrylate onto Polypropylene
    Yu-hui Ao
    Kai Tang
    Na Xu
    Hai-dong Yang
    Hui-xuan Zhang
    Polymer Bulletin, 2007, 59 : 279 - 288
  • [5] Compatibilization of PP/SEBS-MAH blends by grafting glycidyl methacrylate onto polypropylene
    Ao, Yu-hui
    Tang, Kai
    Xu, Na
    Yang, Hai-dong
    Zhang, Hui-xuan
    POLYMER BULLETIN, 2007, 59 (02) : 279 - 287
  • [6] Preparation and characterization of PLA/PBAT blends toughened by poly(lactic acid-r-malic acid) copolymer
    Zhou, Shujing
    Yu, Haoyun
    Li, Yao
    Qi, Chenze
    Li, Jinjing
    COLLOID AND POLYMER SCIENCE, 2024, 302 (08) : 1201 - 1207
  • [7] Preparation and characterization of nano cellulose whiskers reinforced and toughened poly(L-lactic acid) based composites
    Engineering Research Center of Artificial Organs and Materials, Department of Materials Science and Engineering, Jinan University, Guangzhou
    510632, China
    Fuhe Cailiao Xuebao, 6 (1703-1713): : 1703 - 1713
  • [8] PREPARATION AND CHARACTERIZATION OF POLY(LACTIC ACID) HEMOGLOBIN MICROSPHERES
    CEDRATI, N
    MAINCENT, P
    THOMAS, F
    LABRUDE, P
    VIGNERON, C
    ARTIFICIAL CELLS BLOOD SUBSTITUTES AND IMMOBILIZATION BIOTECHNOLOGY, 1994, 22 (03): : 867 - 873
  • [9] Preparation and Antifouling Property of PE/SEBS-g-MAH/SEBS
    Zhang X.
    Xiong Y.
    Dong L.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2024, 40 (03): : 23 - 29
  • [10] Preparation and characterization of poly(lactic acid) and maleic anhydride graft copolymer (PLA-g-MAH) and its blends with PEG
    Ma, WG
    Wang, LF
    Gross, RA
    McCarthy, SP
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1997, 213 : 320 - PMSE