Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels

被引:45
作者
Han, Seung Youb [1 ]
Sohn, Seok Su [1 ]
Shin, Sang Yong [1 ]
Bae, Jin-ho [2 ]
Kim, Hyoung Seop [1 ]
Lee, Sunghak [1 ]
机构
[1] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Pohang 790784, South Korea
[2] POSCO, Tech Res Labs, Sheet Prod & Proc Res Grp, Pohang 790785, South Korea
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 551卷
关键词
API X80 linepipe steel; Microstructure; Bauschinger effect; Strain hardening; STRESS; PHASE;
D O I
10.1016/j.msea.2012.05.007
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In the present study, effects of microstructure and yield ratio on strain hardening and Bauschinger effect were investigated in two API X80 steel sheets fabricated by controlling the start cooling temperature. The steel whose start cooling temperature was lower had the higher fractions of granular bainite (GB) and martensite-austenite (MA) constituent and the lower fraction of acicular ferrite (AF), and showed the higher yield ratio. According to the results of the strain-reversal test composed of compressive and tensile tests at various compressive pre-strains, the reduction in yield strength of the steel having higher fractions of GB and MA was generally higher than that of the steel having lower fractions. This result could be explained by difference in density of mobile dislocations and by competing mechanisms between Bauschinger effect and strain hardening, which were susceptible to the minute change in pre-strain during the piping process. When the pre-strain was low, e.g., lower than 4%, the steels having low yield ratio and small Bauschinger effect were desirable to minimize the reduction in yield strength. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:192 / 199
页数:8
相关论文
共 39 条
[1]   BAUSCHINGER EFFECT AND DISCONTINUOUS YIELDING [J].
ABEL, A ;
MUIR, H .
PHILOSOPHICAL MAGAZINE, 1972, 26 (02) :489-&
[2]  
[Anonymous], PIPELINE TECHNOLOGY
[3]  
[Anonymous], 2009, E8M098 ASTM
[4]  
[Anonymous], 1971, SPEC HIGH TEST LIN
[5]  
[Anonymous], 1973, MAT SPEC
[6]  
[Anonymous], FRACTURE PROPERTIES
[7]  
ASTM, 2004, E60604 ASTM
[8]   Analysis and prevention of yield strength drop during spiral piping of two high-strength API-X70 steels [J].
Choi, CW ;
Koh, HJ ;
Lee, S .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (10) :2669-2674
[9]  
Dieter G.E., 1986, MECH METALLURGY, P236
[10]   DISLOCATION MOVEMENT THROUGH RANDOM ARRAYS OF OBSTACLES [J].
FOREMAN, AJE ;
MAKIN, MJ .
PHILOSOPHICAL MAGAZINE, 1966, 14 (131) :911-&