Comparison of the 1D and 2D calculation models used for determination of the heat transfer coefficient during flow boiling heat transfer in a minichannel

被引:3
作者
Strak, Kinga [1 ]
Piasecka, Magdalena [1 ]
Maciejewska, Beata [2 ]
机构
[1] Kielce Univ Technol, Fac Mechatron & Mech Engn, Al 1000 Lecia PP 7, PL-25314 Kielce, Poland
[2] Kielce Univ Technol, Fac Management & Comp Modelling, Al 1000 Lecia PP 7, PL-25314 Kielce, Poland
来源
XII INTERNATIONAL CONFERENCE ON COMPUTATIONAL HEAT, MASS AND MOMENTUM TRANSFER (ICCHMT 2019) | 2019年 / 128卷
关键词
TREFFTZ FUNCTIONS; IDENTIFICATION;
D O I
10.1051/e3sconf/201912801017
中图分类号
O414.1 [热力学];
学科分类号
摘要
The paper discusses the results of the flow boiling heat transfer in a vertical minichannel with rectangular cross-section. The heating element for FC-72 flowing in the minichannel is a thin plate. Infrared thermography is used to determine changes in the temperature on its outer side. The aim of the calculation is to determine the heat transfer coefficient using 1D and 2D calculation models. Local values of heat transfer coefficient on the surface between the heated plate and boiling fluid are calculated from the Newton s and Fourier s laws. In 2D model the plate temperature distribution is obtained by solving the inverse heat conduction problem. The governing equation is solved by means of two methods: the non-continuous Trefftz method and the Beck method. The results are presented as plate temperature and heat transfer coefficient calculated using 1D and 2D models as a function of the distance from the minichannel inlet. The analysis of the results revealed that the values and distributions of the heat transfer coefficient calculated by means of both models were similar. This suggests that all mentioned methods are interchangeable.
引用
收藏
页数:7
相关论文
共 36 条
[1]   Pressure effect on flow boiling heat transfer of water in minichannels [J].
Bang, K. H. ;
Kim, K. K. ;
Lee, S. K. ;
Lee, B. W. .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (03) :280-286
[2]  
Beck J.V., 1985, Inverse Heat Conduction Ill-Posed Problems
[3]   Direct and inverse heat transfer in non-contacting face seals [J].
Blasiak, Slawomir ;
Pawinska, Anna .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 90 :710-718
[4]   Bubbly boiling of environment-friendly refrigerating media [J].
Bohdal, T .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2000, 21 (04) :449-455
[5]   Experimental investigation of R-245fa flow boiling in minichannels at high saturation temperatures: Flow patterns and flow pattern maps [J].
Charnay, Romain ;
Bonjour, Jocelyn ;
Revellin, Remi .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2014, 46 :1-16
[6]   Boiling local heat transfer enhancement in minichannels using nanofluids [J].
Chehade, Ali Ahmad ;
Gualous, Hasna Louahlia ;
Le Masson, Stephane ;
Fardoun, Farouk ;
Besq, Anthony .
NANOSCALE RESEARCH LETTERS, 2013, 8 :1-20
[7]   Solution of the Stationary 2D Inverse Heat Conduction Problem by Treffetz Method [J].
Cialkowski, Michael J. ;
Frackowiak, Andrzej .
JOURNAL OF THERMAL SCIENCE, 2002, 11 (02) :148-162
[8]   HEAT TRANSFER DURING POOL BOILING OF WATER, METHANOL, AND R141B ON POROUS COATED HORIZONTAL TUBE BUNDLES [J].
Cieslinski, Janusz T. ;
Krasowski, Krzysztof .
JOURNAL OF ENHANCED HEAT TRANSFER, 2013, 20 (02) :165-177
[9]   Numerical investigation of pressure drop and heat transfer through reconstructed metal foams and comparison against experiments [J].
Diani, Andrea ;
Bodla, Karthik K. ;
Rossetto, Luisa ;
Garimella, Suresh V. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 88 :508-515
[10]   Experimental investigation of transient boiling heat transfer in microchannels [J].
Diaz, M. Cortina ;
Schmidt, J. .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2007, 28 (01) :95-102