Characterization of fully and partially penetrated Nd: YAG laser-weld dissimilar metal joints

被引：5

作者：

Tadamalle, A. P. ^{[1
]}

Reddy, Y. P. ^{[2
]}

Ramjee, E. ^{[3
]}

Reddy, K. Vijaya Kumar ^{[3
]}

机构：

[1] Sinhgad Coll Engn, Dept Mech Engn, Pune 411041, Maharashtra, India

[2] NBN Sinhgad Sch Engn, Dept Mech Engn, Pune 411041, Maharashtra, India

[3] Jawaharlal Nehru Technol Univ, Dept Mech Engn, Hyderabad 500085, Andhra Pradesh, India

来源：

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2018年 / 32卷 / 02期

关键词：

Chemical composition; Penetration depth; Dissimilar metals; Laser beam welding; Microhardness; AUSTENITIC STAINLESS-STEEL; MICROSTRUCTURE; CRACKING; ALLOYS;

D O I：

10.1007/s12206-018-0108-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Welding dissimilar metals and alloys is essential to emerging new technologies in manufacturing industries. This process is difficult because of the formation of intermetallic layers and the variations in the chemical and mechanical properties in the weld region. This paper aimed to characterize fully and partially penetrated dissimilar metal weld joints. The welding experiments were conducted on 0.5 mm-thick dissimilar weld joints for the investigation of the effects of the process parameters on the weld joints. Variations in chemical composition, oxide formation, imperfections and mechanical properties were analyzed. Results revealed that the weld joint characteristics notably deviated from the base metal properties in terms of hardness, strength, chemical composition, oxide formation and other constituents of the weld pool region. This study offers insight into the effects of process parameters and the necessary changes in weld composition for the improvement of welds joints.

引用

页码：615 / 621

页数：7

共 18 条

[11] Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding [J].

Sathiya, P. ;

Mishra, Mahendra Kumar ;

Shanmugarajan, B. .

MATERIALS & DESIGN, 2012, 33 :203-212

[12] Solidification cracking in austenitic stainless steel welds [J].

Shankar, V ;

Gill, TPS ;

Mannan, SL ;

Sundaresan, S .

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2003, 28 (3-4) :359-382

[13] On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys [J].

Springer, H. ;

Szczepaniak, A. ;

Raabe, D. .

ACTA MATERIALIA, 2015, 96 :203-211

[14] MELTING RATIO IN LASER-WELDING OF DISSIMILAR METALS [J].

SUN, Z ;

MOISIO, T .

JOURNAL OF MATERIALS SCIENCE LETTERS, 1994, 13 (13) :980-982

[15] Characterization of stainless steel and galvanized iron 0.5 mm thick laser weld joints [J].

Tadamalle, A. P. ;

Reddy, Y. P. ;

Ramjee, E. ;

Reddy, K. V. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (1-4) :383-395

[16] Laser-tungsten inert gas hybrid welding of dissimilar metals AZ31B Mg alloys to Zn coated steel [J].

Tan, Caiwang ;

Li, Liqun ;

Chen, Yanbin ;

Guo, Wei .

MATERIALS & DESIGN, 2013, 49 :766-773

[17] Effect of microstructure and chemical composition on cold crack susceptibility of high-strength weld metal [J].

Yi, Hui-Jun ;

Lee, Yong-Jun ;

Kim, Jong-Yun ;

Kang, Sung-Su .

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2011, 25 (09) :2185-2193

[18]

[No title captured]

← 1 2 →