Sintering behavior of Al2O3-TiC composite powder prepared by SHS process

被引：33
|
作者：
Lee, JH [1 ]
Ko, SK [1 ]
Won, CW [1 ]
机构：
[1] Chungnam Natl Univ, Rapidly Solidified Mat Res Ctr, RASOM, Taejon 305764, South Korea
来源：
MATERIALS RESEARCH BULLETIN | 2001年 / 36卷 / 5-6期
关键词：
ceramics; chemical synthesis; X-ray diffraction; mechanical properties;
D O I：
10.1016/S0025-5408(01)00579-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3-TiC: composite powder was prepared by the self-propagating high-temperature synthesis (SHS) process, using TiO2,, Al, and C powders as raw materials. The effects of keeping the TiO2:Al:C molar ratio fixed at 3:4:2.7 while varying the carbon sources and cooling time on the products were studied. The highest combustion temperature and combustion velocity were obtained at activated carbon. But, microstructure and mechanical properties of sintered Al2O3-TiC composite did not show any significant differences according to the carbon sources. Hot pressing was found to be very effective in hindering the formation of pore and obtaining a dense sintered body at 1650 degreesC. The sintered body produced by hot-pressing was about 98.8% and 99.2%: of the theoretical density for synthesized and commercial powder respectively. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：989 / 996
页数：8
相关论文
共 50 条
  • [31] Mechanical Properties and Erosive Wear Resistance of Zirconia Toughened Al2O3-TiC Ceramics
    Lihua Xu
    Fang Lian
    Yuyan Guo
    Qiang Zhen
    Jose Maria
    Fonte Ferreira
    Fuming Wang
    Wenchao Li(Material Science and Engineering School
    International Journal of Minerals,Metallurgy and Materials, 2000, (02) : 110 - 114
  • [32] Sintering Behavior and Property of Bioglass Modified HA-Al2O3 Composite
    Wang, Li-li
    Wang, Xiu-feng
    XuDing
    Zhu, Jian-feng
    SCIENCE OF SINTERING, 2012, 44 (03) : 265 - 270
  • [33] Characterization of Aluminum Oxide Films Deposited on Al2O3-TiC by RF Diode Sputtering
    Panitchakan, H.
    Limsuwan, P.
    ISEEC, 2012, 32 : 902 - 908
  • [34] Selective laser sintering of polymer-coated Al2O3/ZrO2/TiC ceramic powder
    Bai, PK
    Cheng, J
    Liu, B
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (02) : 261 - 265
  • [35] Influence of Cobalt Additive on Mechanical Properties and Residual Stress of Al2O3-TiC Ceramic Cutting Tool Material
    Yin, Zengbin
    Huang, Chuanzhen
    Zou, Bin
    Liu, Hanlian
    Zhu, Hongtao
    Wang, Jun
    ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 657 - 661
  • [36] Selective laser sintering of polymer-coated Al2O3/ZrO2/TiC ceramic powder
    白培康
    程军
    刘斌
    Transactions of Nonferrous Metals Society of China, 2005, (02) : 261 - 265
  • [37] Preparation and sintering behavior of Al2O3-Y2O3/ZrB2 composite powders
    Song, Jie-Guang
    Wang, Fang
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2011, 12 (05): : 602 - 605
  • [38] Impact of alumina powder bed on hardness and fracture toughness in the sintering process of NiO-GDC-Bi2O3 composite prepared by sol-gel method
    La Cruz, A. Ramirez-De
    Bocanegra-Bernal, M. H.
    Aguilar-Elguezabal, A.
    Reyes-Rojas, A.
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2024, 110 (02) : 419 - 433
  • [39] Evaluation of modulus of elasticity, nano-hardness and fracture toughness of TiB2-TiC-Al2O3 composite coating developed by SHS and laser cladding
    Masanta, Manoj
    Shariff, S. M.
    Choudhury, A. Roy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (16-17): : 5327 - 5335
  • [40] Influence of cobalt phase on mechanical properties and thermal shock performance of Al2O3-TiC composites
    Li, J
    Ma, LP
    CERAMICS INTERNATIONAL, 2005, 31 (07) : 945 - 951
12345