Evaluation of one-way shear behaviour of reinforced concrete slabs: experimental and numerical analysis

The shear design of concrete slabs is still an unsolved problem. The following study presents experimental and numerical investigations on the shear behaviour of reinforced concrete slabs (without shear reinforcement) under concentrated loads. The small thick slabs of 10 cm were tested in this study. Experimental tests were conducted to quantify the shear strength and the associated failure modes. The influence of several variables was addressed such as the influence of boundary conditions, four supported side slabs instead of two supported side slabs, the influence of loading plate length. A series of eight tests on six slabs were presented. The experiments are firstly used to evaluate the pertinence of Eurocode 2 and Model Code 2010 formulations using the levels of approximation LoA I and LoA II for the shear design of reinforced concrete slabs without shear reinforcement in comparison with the French approach, and secondly validated numerical modelling using the non-linear finite element method. The proposed numerical model showed good agreement with the experimental results in terms of slab behaviour.