Tribocorrosion properties of plasma nitrided, Ti-DLC coated and duplex surface treated AISI 316L stainless steel

被引：17
作者：
Uzun, Y. [1 ]
机构：
[1] Ataturk Univ, Fac Engn, Dept Mech Engn, Erzurum, Turkey
来源：
SURFACE & COATINGS TECHNOLOGY | 2022年 / 441卷
关键词：
316L stainless-steel; Plasma nitriding; Ti-DLC coating; Duplex surface treatment; Tribocorrosion; SLIDING WEAR; TRIBOLOGICAL PROPERTIES; CORROSION PROPERTIES; IMPLANT MATERIAL; TEMPERATURE; BEHAVIOR; PERFORMANCE; RESISTANCE; COATINGS; FRICTION;
D O I：
10.1016/j.surfcoat.2022.128587
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, the tribocorrosion behavior of untreated, plasma nitrided (450 ?-4 h), Ti-DLC coated and duplex treated (Ti-DLC coating after nitriding) AISI 316L stainless-steel were investigated. The plasma nitriding process was carried out in a gas mixture of 80 % H2 and 20 % N2 at 450 ? for 4 h. A titanium (Ti) interlayer was coated on the substrate for Ti-DLC coating. Then, a diamond-like carbon (DLC) film was grown on the Ti interlayer. As a result of the study, it was determined that the damage caused by the wear mechanism was much more than the corrosive effects. In general, thanks to the layers formed on the surface, the wear and tribocorrosion performance of the treated samples increased compared to the untreated sample. It was observed that the best tribocorrosion resistance among the treated surfaces was obtained in the duplex surface-treated sample.
引用
收藏
页数：9
相关论文
共 41 条
[1]   Tribocorrosion behaviour of DLC-coated 316L stainless steel [J].
Azzi, M. ;
Paquette, M. ;
Szpunar, J. A. ;
Klemberg-Sapieha, J. E. ;
Martinu, L. .
WEAR, 2009, 267 (5-8) :860-866
[2]   Influence of the carbon content on the corrosion and tribocorrosion performance of Ti-DLC coatings for biomedical alloys [J].
Bayon, R. ;
Igartua, A. ;
Gonzalez, J. J. ;
Ruiz de Gopegui, U. .
TRIBOLOGY INTERNATIONAL, 2015, 88 :115-125
[3]   Wear corrosion properties of nano-structured SiC-nickel composite coatings obtained by electroplating [J].
Benea, L ;
Bonora, PL ;
Borello, A ;
Martelli, S .
WEAR, 2001, 249 (10-11) :995-1003
[4]  
Bhushan B., 2013, Introduction to Tribology, P501
[5]   Effect of surface chemistry on the mechanical response of metals in sliding tribocorrosion systems [J].
Bidiville, A. ;
Favero, M. ;
Stadelmann, P. ;
Mischler, S. .
WEAR, 2007, 263 :207-217
[6]   Tribocorrosion behavior of additive manufactured Ti-6Al-4V biomedical alloy [J].
Buciumeanu, M. ;
Bagheri, A. ;
Shamsaei, N. ;
Thompson, S. M. ;
Silva, F. S. ;
Henriques, B. .
TRIBOLOGY INTERNATIONAL, 2018, 119 :381-388
[7]  
Çelik A, 2007, KOVOVE MATER, V45, P35
[8]   Wear resistance of nitrided and DLC coated PH stainless steel [J].
Dalibon, Eugenia L. ;
Trava-Airoldi, Vladimir ;
Pereira, Lania A. ;
Cabo, Amado ;
Bruehl, Sonia P. .
SURFACE & COATINGS TECHNOLOGY, 2014, 255 :22-27
[9]   S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys [J].
Dong, H. .
INTERNATIONAL MATERIALS REVIEWS, 2010, 55 (02) :65-98
[10]   THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF TITANIUM ALUMINUM NITRIDE COATINGS FORMED IN A 4 MAGNETRON CLOSED-FIELD SPUTTERING SYSTEM [J].
EFEOGLU, I ;
ARNELL, RD ;
TINSTON, SF ;
TEER, DG .
SURFACE & COATINGS TECHNOLOGY, 1993, 57 (2-3) :117-121
12345