Achieving traceability in chemical measurement - a metrological approach to proficiency testing

ISO/IEC 17025 requires that testing laboratories establish the traceability of their measurements, preferably to the SI units of measurement. The responsibility for establishing traceability lies with each individual laboratory and must be achieved by following a metrological approach. The results of measurements made in such a way are traceable to the standards used in method validation and to the calibration standards used during the measurement process. If these standards are traceable to SI then the measurements will also be traceable to SI. Participation in appropriate proficiency studies (an ISO/IEC 17025 requirement) enables laboratories to demonstrate the comparability of their measurements. If the materials used for the studies have traceable assigned values, then proficiency testing also provides information about measurement accuracy and confirms, or otherwise, that appropriate traceability has been established. This paper will report on a new approach for the establishment of traceable assigned values for chemical testing proficiency studies. The work is conducted at a "fit for purpose" level of measurement uncertainty, with costs contained at a level similar to previous "consensus" based proficiency studies. By establishing traceable assigned values in a cost effective way, NARL aims to demonstrate the added value of the metrological approach to participant laboratories.