A New Recycled Al-Si-Mg Alloy for Sustainable Structural Die Casting Applications

被引：37

作者：

CINKILIC, E. M. R. E. ^{[1
,2
]}

MOODISPAW, M. I. C. H. A. E. L. ^{[1
]}

ZHANG, J. I. A. N. Y. U. E. ^{[1
]}

MIAO, J. I. A. S. H. I. ^{[1
]}

LUO, A. L. A. N. A. ^{[3
,4
]}

机构：

[1] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA

[2] Hakkari Univ, Dept Mat Sci & Engn, TR-30000 Hakkari, Turkey

[3] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA

[4] Ohio State Univ, Dept Integrated Syst Engn, Columbus, OH 43210 USA

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2022年 / 53卷 / 08期

关键词：

CONTAINING INTERMETALLIC PHASES; FE-RICH INTERMETALLICS; ALUMINUM-ALLOYS; IRON; MICROSTRUCTURE; EVOLUTION; STRONTIUM; MN; NUCLEATION; REMOVAL;

D O I：

10.1007/s11661-022-06711-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often result in the formation of brittle beta-Al5FeSi phase which reduces the ductility of aluminum castings. In this study, a new secondary Al-Si-Mg alloy with high Fe content (about 0.44 wt pct) was developed for die casting applications. Based on thermodynamic modeling, manganese was added to obtain a designed Fe-to-Mn ratio of 2 which successfully suppressed the formation of beta-Al5FeSi phase, by forming alpha-Al-15(Fe,Mn)(3)Si-2 phase with rounded or hexagonal morphology. Additionally, a fine needle-like pi-Al8FeMg3Si2 phase was also formed within the eutectic regions. The new recycled alloy showed comparable mechanical properties in the as-cast and heat-treated (T5 and T6) conditions to three major primary die cast alloys (<= 0.2 wt pct Fe) with similar composition. Ductility up to 7.4 pct from tensile elongation was achieved in the as-cast recycled alloy due to the modification and refinement of alpha-Al-15(Fe,Mn)(3)Si-2 by Mn and Sr additions. Tensile elongation was further improved to 9.1 pct after T6 treatment as a result of dissolution of pi-Al8FeMg3Si2 phase, defragmentation of alpha-Al-15(Fe,Mn)(3)Si-2, and the spheroidization of Si phase. This new alloy provides a promising path for increasing usage of recycled aluminum with high Fe content in structural die castings for automotive and other applications.

引用

页码：2861 / 2873

页数：13

共 33 条

[1]

Anderson K., 2019, PROP SEL ALUM ALLOYS, V2B, p2B

[2] Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility [J].

Boesch, Dominik ;

Pogatscher, Stefan ;

Hummel, Marc ;

Fragner, Werner ;

Uggowitzer, Peter J. ;

Goeken, Mathias ;

Hoeppel, Heinz Werner .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (03) :1035-1045

[3] Preparation and Melting of Scrap in Aluminum Recycling: A Review [J].

Capuzzi, Stefano ;

Timelli, Giulio .

METALS, 2018, 8 (04)

[4] Effect of strontium and phosphorus on eutectic Al-Si nucleation and formation of β-Al5FeSi in hypoeutectic Al-Si foundry alloys [J].

Cho, Y. H. ;

Lee, H. -C. ;

Oh, K. H. ;

Dahle, A. K. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (10) :2435-2448

[5] A Formation Map of Iron-Containing Intermetallic Phases in Recycled Cast Aluminum Alloys [J].

Cinkilic, E. ;

Ridgeway, C. D. ;

Yan, X. ;

Luo, A. A. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50 (12) :5945-5956

[6] Interactions between iron, manganese, and the Al-Si eutectic in hypoeutectic Al-Si alloys [J].

Dinnis, C. M. ;

Taylor, J. A. ;

Dahle, A. K. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (11) :3283-3291

[7] As-cast morphology of iron-intermetallics in Al-Si foundry alloys [J].

Dinnis, CM ;

Taylor, JA ;

Dahle, AK .

SCRIPTA MATERIALIA, 2005, 53 (08) :955-958

[8] Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation [J].

Du, Y ;

Chang, YA ;

Huang, BY ;

Gong, WP ;

Jin, ZP ;

Xu, HH ;

Yuan, ZH ;

Liu, Y ;

He, YH ;

Xie, FY .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 363 (1-2) :140-151

[9] Evolution of sludge particles in secondary die-cast aluminum alloys as function of Fe, Mn and Cr contents [J].

Ferraro, Stefano ;

Fabrizi, Alberto ;

Timelli, Giulio .

MATERIALS CHEMISTRY AND PHYSICS, 2015, 153 :168-179

[10] Improving aluminum recycling: A survey of sorting and impurity removal technologies [J].

Gaustad, Gabrielle ;

Olivetti, Elsa ;

Kirchain, Randolph .

RESOURCES CONSERVATION AND RECYCLING, 2012, 58 :79-87

← 1 2 3 4 →