Numerical simulation on a HPLWR fuel assembly flow with one revolution of wrapped wire spacers

Three dimensional computational-fluid-dynamics simulations are performed for the fluid flow within a 40 rod fuel bundle in a square arrangement with a central moderator channel To ensure spacing between the rods, the design of the bundle uses thin wires wrapped counter-clockwise around each rod This geometry is presently investigated in the framework of the European High-Performance Light-Water Reactor (HPLWR). which operates at supercritical pressure of 25 MPa A section with one revolution located in the evaporator region of the HPLWR core is investigated using hydraulic (to ensure filly developed flow inlet boundary conditions and reference for heated cases) and thermal-hydraulic boundary conditions. The geometry of wrapped wires gives rise to additional mixing and a circulating or 'sweeping' flow near the outer and inner regions of the fuel element next to the wall of the so called fuel assembly and moderator box Sonic interesting flow features associated with the complex three-dimensional flow with significant transverse velocity components are visualized as the first evaluated result of this diversified investigation