Microstructure Evolution of Nickel-based Superalloy GH202 After High Temperature Oxidation from 800 °C to 1100 °C

被引:0
作者
Cao Jiangdong [1 ,2 ]
Jiang Bochen [1 ]
Cao Xueyu [1 ]
Xia Yuyue [1 ]
Huang Jian [1 ]
Yao Da [1 ]
机构
[1] Jiangsu Shipping Coll, Sch Intelligent Mfg & Informat, Nantong 226010, Peoples R China
[2] Jiangsu Tenesun Co Ltd, Nantong 226010, Peoples R China
关键词
superalloy; microstructure; high temperature oxidation; carbide; strengthening phase; BEHAVIOR; CARBIDES; GROWTH;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Microstructure evolution of Ni-based superalloy GH202 after oxidation from 800 degrees C to 1100 degrees C was investigated. The results show that the hardness of GH202 decreases with the increase of oxidation temperature, and the hardness is decreased by 43.5% after oxidation at 1100 degrees C for 100 h. The growth rate of the grains after oxidation at 800 and 900 degrees C is slower and the grains increase slightly at 900 degrees C. The grain size increases significantly after oxidation at 1000 and 1100 degrees C, and many fine grains are annexed to form large grains due to grain boundary migration and elemental diffusion during the recrystallization at high temperatures for above 100 h. The big block carbides (MC) decompose into a large number of carbon atoms which combine with Cr atoms to form a few Cr-rich granular M23C6. After oxidation at 900 degrees C for 150 h, the M23C6 evolves into Ti-rich M6C. With the increase of oxidation temperature, the carbides almost melt into gamma phase. Moreover, the gamma' phase gradually grows up after oxidation at 800, 900 and 1000 degrees C, and it is completely dissolved into the gamma phase after oxidation at 1100 degrees C for 100 h.
引用
收藏
页码:4288 / 4295
页数:8
相关论文
共 50 条
  • [41] Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700°C
    Thibault, Kevin
    Locq, Didier
    Caron, Pierre
    Boivin, Denis
    Renollet, Yves
    Brechet, Yves
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 14 - 21
  • [42] Effect of trace impurity elements on the high-temperature oxidation resistance of a high-purity nickel-based superalloy
    Li, Yi
    Tan, Yi
    You, Xiaogang
    Wang, Dinggang
    Hu, Yebing
    Song, Shuang
    Qiang, Jianbing
    CORROSION SCIENCE, 2023, 211
  • [43] Microstructure evolution and mechanical performance of nickel based superalloy C1023 at elevated temperatures
    Liu, Yahui
    Wang, Jun
    Kang, Maodong
    Mao, Feifei
    Li, Jianzhong
    Wang, Guoxiang
    He, Shuxian
    Gao, Haiyan
    Sun, Baode
    MATERIALS CHARACTERIZATION, 2018, 138 : 174 - 185
  • [44] Influence of water vapour on isothermal and thermal cyclic oxidation conditions of a Nickel-based SY625 steel at 1100°C.
    Rolland, Raphael
    Buscail, Henri
    Issartel, Christophe
    Riffard, Frederic
    Rabaste, Francoise
    Perrier, Sebastien
    DIFFUSION IN MATERIALS - DIMAT 2011, 2012, 323-325 : 333 - 338
  • [45] Interfacial microstructure and high-temperature strength in silicon nitride/nickel-based superalloy bonding
    Lan, Liang
    Ren, Zhongming
    Yu, Jianbo
    Li, Chuanjun
    Zhong, Yunbo
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2016, 30 (13) : 1430 - 1440
  • [46] Strain rate and oxidation effects on crack initiation at 600 and 650 °C in a nickel-based superalloy
    Perrais, M.
    Seror, A.
    Burteau, A.
    Andrieu, E.
    Poquillon, D.
    MATERIALS AT HIGH TEMPERATURES, 2016, 33 (03) : 241 - 247
  • [47] Isothermal High-Temperature Oxidation Behaviour of Nickel-Based Superalloy IN740H
    Singh, R. K.
    Paswan, S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (05) : 1287 - 1297
  • [48] Damage tolerance of low angle grain boundary in a fourth generation Nickel-based single crystal superalloy at 1100 °C service conditions
    Yang, Wenchao
    Duan, Xingyu
    Liu, Chen
    Qu, Pengfei
    Fu, Haitao
    Zhang, Jun
    Liu, Lin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 881
  • [50] Single-pass ultra-high-power laser welding of thick nickel-based GH3535 superalloy: Microstructure evolution and microhardness
    Pan, Yang
    Zhu, Qingchun
    Wang, Yuanwen
    Jiang, Li
    Yan, Yi
    Li, Zhijun
    Wang, Jiaoyang
    Zhu, Yucheng
    Li, Chaowen
    MATERIALS LETTERS, 2024, 376