Durability assessment of high-performance concrete with SRAs and FLWAs

被引:20
作者
Deboodt, Tyler [1 ]
Fu, Tengfei [1 ]
Ideker, Jason H. [1 ]
机构
[1] Oregon State Univ, Sch Civil & Construct Engn, Corvallis, OR 97331 USA
关键词
Internal curing; Shrinkage-reducing admixtures; Lightweight aggregate; Freeze-thaw; Chloride ingress; Restrained shrinkage; RESTRAINED SHRINKAGE CRACKING; AUTOGENOUS SHRINKAGE; LIGHTWEIGHT AGGREGATE; REDUCING ADMIXTURES; FLY-ASH; MIXTURES;
D O I
10.1016/j.cemconcomp.2014.12.004
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The use of pre-wetted fine lightweight aggregate (FLWA) and shrinkage reducing admixtures (SRAs) have been shown as effective means to reduce deleterious effects of autogenous and in limited studies, drying shrinkage in concrete. However, minimal research has been done on the durability performance of concretes made with these materials. In this study, freeze-thaw resistance, permeability, and restrained drying shrinkage of high-performance concrete (HPC) were determined. Two methods to reduce shrinkage, pre-wetted FLWA and SRAs, were studied. In mixtures containing either shrinkage reducing method, similar freeze thaw performance could be achieved with an adequate air void system when compared to the control mixture. The addition of FLWA and SRAs also reduced the permeability of HPC by 23% according to ASTM C1202. Furthermore, time to cracking in the restrained ring test (ASTM C1581) was prolonged in both shrinkage mitigation techniques. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:94 / 101
页数:8
相关论文
共 51 条
[1]  
[Anonymous], 2008, C215 ASTM
[2]  
[Anonymous], 2010, C1202 ASTM
[3]  
[Anonymous], 2004, C1581 ASTM
[4]  
[Anonymous], T33408 AASHTO
[5]  
[Anonymous], 2009, C150 ASTM
[6]  
[Anonymous], 2005, C1608 ASTM
[7]  
[Anonymous], 2007, C192 ASTM
[8]  
[Anonymous], 2010, C494 ASTM
[9]  
[Anonymous], 2000, C1240 ASTM
[10]  
[Anonymous], 2003, C666 ASTM