Hybridization Effects of S-glass fiber on Charpy impact resistance of carbon/aramid fiber reinforced epoxy composite laminates

被引：6

作者：

Alsaadi, Mohamad ^{[1
]}

机构：

[1] Univ Technol Baghdad, Mat Engn Dept, Baghdad 10066, Iraq

来源：

MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 12期

关键词：

carbon/aramid; S-glass; hybridization; laminate; charpy impact; HYBRID COMPOSITE; MECHANICAL PERFORMANCE; CARBON-FIBER; BEHAVIOR;

D O I：

10.1088/2053-1591/ab5f36

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The objective of the present research work is to investigate the Charpy impact behavior of intraply hybrid carbon/aramid fabric layers with S-glass fabric layers composite laminates for asymmetric and symmetric arrangements. The hybridization effects on Charpy impact characteristics for carbon/aramid with S-glass hybrid composite laminates were compared with those of carbon/aramid/epoxy composite laminates and S-glass/epoxy composite laminates. Deformation degree, impact energy and impact strength were strongly affected by the position and number of carbon/aramid layers in addition to the impact side direction due to variation of impact properties between carbon/aramid fibers and S-glass fibers. Using S-glass layers instead of carbon/aramid layers exhibited decreasing in the deformation level particularly for carbon/aramid side impact in addition to improve the impact strength of the hybrid composite.

引用

页数：10

共 36 条

[1] Effect of S-glass fabric on the mechanical characteristics of a hybrid carbon/aramid fabric reinforced epoxy composites [J].

Alsaadi, Mohamad ;

Erklig, Ahmet ;

Alrawi, Humam .

MATERIALS RESEARCH EXPRESS, 2017, 4 (05)

[2] Impact response of woven composites with small weaving angles [J].

Atas, Cesim ;

Liu, Dahsin .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2008, 35 (02) :80-97

[3] Experimental investigation of notch effect and ply number on mechanical behavior of interply hybrid laminates (glass/carbon/epoxy) [J].

Belgacem, Leila ;

Ouinas, Djamel ;

Vina Olay, Jaime Aurelio ;

Arguelles Amado, Antonio .

COMPOSITES PART B-ENGINEERING, 2018, 145 :189-196

[4] Flexural fatigue behavior of cross-ply laminates: An experimental approach [J].

A. R. Bezazi ;

A. El Mahi ;

J.-M. Berthelot ;

B. Bezzazi .

Strength of Materials, 2003, 35 (2) :149-161

[5]

Bhatia NMH, 1982, ASTM STP, V22, P183

[6] Hybridization Effects on Charpy Impact Behavior of Basalt/Aramid Fiber Reinforced Hybrid Composite Laminates [J].

Bozkurt, Omer Yavuz ;

Erklig, Ahmet ;

Bulut, Mehmet .

POLYMER COMPOSITES, 2018, 39 (02) :467-475

[7] The effects of S-glass fiber hybridization on vibration-damping behavior of intraply woven carbon/aramid hybrid composites for different lay-up configurations [J].

Bulut, Mehmet ;

Alsaadi, Mohamad ;

Erklig, Ahmet ;

Alrawi, Humam .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 233 (09) :3220-3231

[8] Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres [J].

Chen, Dongdong ;

Luo, Quantian ;

Meng, Maozhou ;

Li, Qing ;

Sun, Guangyong .

COMPOSITES PART B-ENGINEERING, 2019, 176

[9] On the effect of glass and carbon fiber hybridization in fiber metal laminates: Analytical, numerical and experimental investigation [J].

Dadej, Konrad ;

Bienias, Jaroslaw ;

Surowska, Barbara .

COMPOSITE STRUCTURES, 2019, 220 :250-260

[10]

Dogan NF, 2019, MATER RES EXPRESS, V6

← 1 2 3 4 →