Microstructure evolution of commercial-purity titanium during cryorolling

被引：23

作者：

D'yakonov, G. S. ^{[1
]}

Zherebtsov, S. V. ^{[2
]}

Klimova, M. V. ^{[2
]}

Salishchev, G. A. ^{[2
]}

机构：

[1] Ufa State Aviat Tech Univ, Inst Phys Adv Mat, Ufa 450000, Russia

[2] Belgorod State Natl Res Univ, Lab Bulk Nanostruct Mat, Belgorod 308015, Russia

来源：

PHYSICS OF METALS AND METALLOGRAPHY | 2015年 / 116卷 / 02期

关键词：

titanium; cryorolling; twinning; dislocation gliding; microstructure refinement; EBSD; ANGLE GRAIN-BOUNDARIES; DEFORMATION; MECHANISMS; TEXTURE; ALLOY; SIZE; SLIP; TI;

D O I：

10.1134/S0031918X14090038

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Electron backscatter diffraction and transmission electron microscopy have been used to analyze the microstructural evolution of titanium during rolling at a cryogenic temperature (T = -196A degrees C). It has been found that intensive twinning at the cryogenic deformation temperature accelerates the kinetics of microstructure refinement. The quantitative analysis of microstructure evolution in titanium upon cryorolling has shown that structure evolution is mainly related to mechanical twinning in the initial stages. A substructure is developed and deformation-induced high-angle boundaries are formed in the range of mean and high degrees of deformation. It was established that rolling to the total degree of deformation E > = 93 % (e = 2.6) at T = -196A degrees C leads to the formation of a titanium microstructure with a grain/subgrains size of approximately 80 nm. The contribution of mechanical twinning and dislocation gliding in structural transformations in titanium with increasing degree of deformation during cryorolling is discussed.

引用

页码：182 / 188

页数：7

共 28 条

[1] Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn
Barnett, MR
Keshavarz, Z
Beer, AG
Atwell, D
[J]. ACTA MATERIALIA, 2004, 52 (17) : 5093 - 5103
[2] The transformation of slip dislocations during twinning of copper-aluminum alloy crystals
Basinski, ZS
Szczerba, MS
Niewczas, M
Embury, JD
Basinski, SJ
[J]. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1997, 94 (09): : 1037 - 1043
[3] Useful properties of twist extrusion
Beygelzimer, Y.
Varyukhin, V.
Synkov, S.
Orlov, D.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 503 (1-2): : 14 - 17
[4] STRUCTURE OF HIGH-ANGLE GRAIN BOUNDARIES
BRANDON, DG
[J]. ACTA METALLURGICA, 1966, 14 (11): : 1479 - &
[5] Recrystallization initiated by low-temperature grain boundary motion coupled to stress
Cahn, John W.
Mishin, Yuri
[J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (04) : 510 - 515
[6] Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium
Chun, YB
Yu, SH
Semiatin, SL
Hwang, SK
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2): : 209 - 219
[7] EFFECT OF INTERSTITIAL SOLUTES ON THE STRENGTH AND DUCTILITY OF TITANIUM
CONRAD, H
[J]. PROGRESS IN MATERIALS SCIENCE, 1981, 26 (2-4) : 123 - 404
[8] X-ray line-broadening analysis of deformation mechanisms during rolling of commercial-purity titanium
Glavicic, MG
Salem, AA
Semiatin, SL
[J]. ACTA MATERIALIA, 2004, 52 (03) : 647 - 655
[9] Hirsh P., 1977, ELECT MICROSCOPY THI, VII
[10] Humphreys F.J., 2005, RECRYSTALLIZATION RE

← 1 2 3 →