A study on friction and wear behaviour of carburized, carbonitrided and borided AISI 1020 and 5115 steels

被引：115

作者：

Selçuk, B ^{[1
]}

Ipek, R

Karamis, MB

机构：

[1] Cumhuriyet Univ, Dept Mech Engn, Fac Engn, TR-58140 Sivas, Turkey

[2] Cumhuriyet Univ, High Vocat Training Coll, TR-58140 Sivas, Turkey

[3] Erciyes Univ, Dept Mech Engn, Fac Engn, TR-38090 Kayseri, Turkey

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2003年 / 141卷 / 02期

关键词：

wear behaviour; AISI; 1020; and; 5115; steels; carbonitriding; boronizing;

D O I：

10.1016/S0924-0136(02)01038-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The friction and wear characteristics of AISI 1020 and 5115 steel surfaces improved by various thermochemical heat treatments such as carburizing, carbonitriding and boronizing were determined. Samples prepared from the test materials were treated at liquid and gases carburizing, gases carbonitriding and solid boronizing mediums. The hardness distributions, microstructures and X-ray diffraction studies were performed. The wear tests were carried out with pin-on-disc sample configurations and weight losses were determined as a function of sliding distance and applied load. The friction behaviours of tested samples were also examined. Thus, the heat treating capacity of a simple steel such as AISI 1020 was determined and compared with other treated steel samples. (C) 2002 Elsevier B.V. All rights reserved.

引用

页码：189 / 196

页数：8

共 12 条

[1] FRICTION BETWEEN METAL-SURFACES [J].

ARCHARD, JF .

WEAR, 1986, 113 (01) :3-16

[2] THE DRY WEAR-RESISTANCE OF A CARBONITRIDED STEEL [J].

ARQUES, JL ;

PRADO, JM .

WEAR, 1985, 103 (04) :321-331

[3]

Dawes C., 1990, HEAT TREAT MET, V1, P19

[4]

Hunger H.-J., 1994, HEAT TREAT MET, V2, P31

[5] An evaluation of the possibilities of using borided GG25 cast iron instead of chilled GG25 cast iron (surface properties) [J].

Ipek, R ;

Selçuk, B ;

Karamis, MB ;

Kuzucu, V ;

Yücel, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 105 (1-2) :73-79

[6] An evaluation of the using possibilities of the carbonitrided simple steels instead of carburized low alloy steels (wear properties) [J].

Karamis, MB ;

Ipek, R .

APPLIED SURFACE SCIENCE, 1997, 119 (1-2) :25-33

[7] A SIMPLE APPROACH TO CALCULATION OF THE SLIDING WEAR COEFFICIENT FOR MEDIUM CARBON-STEELS [J].

KARAMIS, MB ;

ODABAS, D .

WEAR, 1991, 151 (01) :23-34

[8] TRIBOLOGICAL STUDY OF CUBIC BORON-NITRIDE FILM [J].

MIYAKE, S ;

WATANABE, S ;

MURAKAWA, M ;

KANEKO, R ;

MIYAMOTO, T .

THIN SOLID FILMS, 1992, 212 (1-2) :262-266

[9]

Olkhovoi L. S., 1986, MET SCI HEAT TREAT, V28, P547

[10]

Pengxun Y., 1992, THIN SOLID FILMS, V214, P44, DOI 10.1016/0040-6090(92)90453-I

← 1 2 →