Expanded Lever Rule for Phase Volume Fraction Calculation of High-Strength Low-Alloy Steel in Thermal Simulation

被引：9

作者：

Lei, Xuanwei ^{[1
]}

Huang, Jihua ^{[1
]}

Chen, Shuhai ^{[1
]}

Zhao, Xingke ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2016年 / 47A卷 / 06期

关键词：

AUSTENITE-FERRITE TRANSFORMATION; C ALLOY; KINETICS; BAINITE; MODEL;

D O I：

10.1007/s11661-016-3410-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The principle of the lever rule on the dilatation curve and its application to the corresponding differential dilatation curve were introduced in a nonoverlapped two-phase continuous cooling process. The lever rule was further expanded in the case of an overlapped two-phase process. The application of the expanded lever rule was based on the approximate symmetry treatment on the differential dilatation curve, which shows reasonably both on the theoretical calculation and in the experimental results. High-strength low-alloy steels were thermal simulated with Gleeble 3500. The transformed phase volume fractions in different cooling processes were calculated by the expanded lever rule and metallography analysis. The results showed the expanded lever rule could calculate reliable phase volume fractions as metallography analysis. (C) The Minerals, Metals & Materials Society and ASM International 2016

引用

页码：2795 / 2803

页数：9

共 50 条

[41] Effects of martensite-austenite constituent on crack initiation and propagation in inter-critical heat-affected zone of high-strength low-alloy (HSLA) steel [J].

Lee, Seok Gyu ;

Sohn, Seok Su ;

Kim, Bohee ;

Kim, Woo Gyeom ;

Um, Kyung-Keun ;

Lee, Sunghak .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 715 :332-339

[42] Excellent combination of plasticity and ultra-high strength in a low-alloy automotive steel treated by conventional continuous annealing [J].

Ding, Hanlin ;

Zhu, Guohui ;

Xiang, Chongchen ;

Pei, Fengjuan ;

Chen, Jian ;

Wang, Yongqiang ;

Chen, Qiwei .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791

[43] The effect of applied thermal cycle conditions on chemistry and volume fraction of M-A constituent formed in a low alloy steel [J].

Endo, S .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1998, 84 (04) :297-302

[44] Cyclic re-austenitization of copper-bearing high-strength low-alloy steels fabricated by laser powder bed fusion [J].

Sridar, Soumya ;

Zhao, Yunhao ;

Xiong, Wei .

MATERIALS CHARACTERIZATION, 2020, 166

[45] Elemental segregation and subsequent precipitation during solidification of continuous cast Nb-V-Ti high-strength low-alloy steels [J].

Zheng, Shuguo ;

Davis, Claire ;

Strangwood, Martin .

MATERIALS CHARACTERIZATION, 2014, 95 :94-104

[46] Phase transformation mechanism of lowcarbon high strength low alloy steel upon continuous cooling [J].

Guo, Y.B. ;

Sui, G.F. ;

Liu, Y.C. ;

Chen, Y. ;

Zhang, D.T. .

Materials Research Innovations, 2015, 19 :416-422

[47] Precipitation of Nb in Ferrite After Austenite Conditioning. Part II: Strengthening Contribution in High-Strength Low-Alloy (HSLA) Steels [J].

M. A. Altuna ;

Amaia Iza-Mendia ;

I. Gutiérrez .

Metallurgical and Materials Transactions A, 2012, 43 :4571-4586

[48] Isochronal Phase Transformations of Low-Carbon High Strength Low Alloy Steel upon Continuous Cooling [J].

Huo, Jie ;

Liu, Yongchang ;

Zhang, Dantian ;

Yan, Zesheng ;

Gao, Zhiming .

STEEL RESEARCH INTERNATIONAL, 2013, 84 (02) :184-191

[49] Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel [J].

Patel, Nand Kumar ;

Walunj, Mahesh Gulab ;

Kumar, B. Ravi .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (03) :1391-1401

[50] Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel [J].

Lambert-Perlade A. ;

Gourgues A.F. ;

Besson J. ;

Sturel T. ;

Pineau A. .

Metallurgical and Materials Transactions A, 2004, 35 (13) :1039-1053

← 1 2 3 4 5 →