Dynamic Jiles-Atherton Model for Determining the Magnetic Power Loss at High Frequency in Permanent Magnet Machines

被引:32
|
作者
Du, Ruoyang [1 ]
Robertson, Paul [1 ]
机构
[1] Univ Cambridge, Elect Engn Div, Cambridge CB3 0FA, England
关键词
Finite-element methods (FEMs); magnetic hysteresis; magnetic losses; magnetization; permanent magnet generators; permanent magnet machines; permanent magnet motors; ROTATIONAL CORE LOSSES; EDDY-CURRENT LOSSES; PARAMETER-IDENTIFICATION; ELECTRICAL MACHINES; HYSTERESIS MODEL; MINOR LOOPS; FLUX;
D O I
10.1109/TMAG.2014.2382594
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper describes a mathematical model for the dynamic magnetic power losses in the laminated steel stator of high-frequency permanent magnet machines, such as brushless dc (BLDC) motors. The model presented is based on a utilization of the dynamic Jiles-Atherton model. Accurate dynamic B-H curve fitting and magnetic power loss derivations have been achieved, where the calculated magnetic losses have shown similar to 95% accuracy from 5 to 2000 Hz over a flux density range of 1.0-1.6 T. This approach has been applied to estimate the magnetic power loss of a small scale high-frequency (>10 000 r/min) BLDC motor, with calculated and measured losses being in close agreement.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] Application of Jiles-Atherton model in description of temperature characteristics of magnetic core
    Zhang, He
    Liu, Yi
    Liu, Siwei
    Lin, Fuchang
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2018, 89 (10):
  • [22] Jiles-Atherton model prediction and compensation of the hysteresis inside magnetic shields
    Peng, Xiangkai
    Li, Lin
    Ren, Wei
    Ji, Jingwei
    Xiang, Jingfeng
    Zhao, Jianbo
    Ye, Meifeng
    Zhao, Xin
    Wang, Bin
    Qu, Qiuzhi
    Li, Tang
    Liu, Liang
    Lu, Desheng
    AIP ADVANCES, 2019, 9 (03)
  • [23] Extended Jiles-Atherton model for modelling the magnetic characteristics of isotropic materials
    Szewczyk, Roman
    Bienkowski, Adam
    Salach, Jacek
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2008, 320 (20) : E1049 - E1052
  • [24] Stochastic Jiles-Atherton model accounting for soft magnetic material variability
    Ramarotafika, Rindra
    Benabou, Abdelkader
    Clenet, Stephane
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2013, 32 (05) : 1679 - 1691
  • [25] Analysis of Magnetizing Process of a New Anisotropic Bonded NdFeB Permanent Magnet Using FEM Combined With Jiles-Atherton Hysteresis Model
    Zhang, Dianhai
    Kim, Hyo-Jun
    Li, Wei
    Koh, Chang-Seop
    IEEE TRANSACTIONS ON MAGNETICS, 2013, 49 (05) : 2221 - 2224
  • [26] Improvement on parameter identification of modified Jiles-Atherton model for iron loss calculation
    Sarker, Pejush Chandra
    Guo, Youguang
    Lu, Haiyan
    Zhu, Jian Guo
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2022, 542
  • [27] Finite Element Analysis of Axial Flux Permanent Magnetic Hysteresis Dampers Based on Vector Jiles-Atherton Model
    Chen, Jinqiao
    Wang, Shuang
    Shang, Huidong
    Hu, Heng
    Peng, Tao
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2022, 37 (04) : 2472 - 2481
  • [28] Core Loss Calculation Based on Finite-Element Method With Jiles-Atherton Dynamic Hysteresis Model
    Li, Yang
    Zhu, Lihua
    Zhu, Jianguo
    IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (03)
  • [29] Modeling of permanent magnets: Interpretation of parameters obtained from the Jiles-Atherton hysteresis model
    Lewis, LH
    Gao, J
    Jiles, DC
    Welch, DO
    JOURNAL OF APPLIED PHYSICS, 1996, 79 (08) : 6470 - 6472
  • [30] Accurate Prediction of Dynamic Hysteresis Loops Using the Modified Jiles-Atherton Model
    Li, Z.
    Huang, X.
    Wu, L.
    Ma, J.
    Fang, Y.
    2018 IEEE INTERNATIONAL MAGNETIC CONFERENCE (INTERMAG), 2018,