Preparation and properties of aluminum phosphate/organosilicon resin organic-inorganic hybrid materials and fiber reinforced composites

被引:21
作者
Deng, Shifeng [1 ]
Wang, Canfeng [1 ]
Zhou, Yan [1 ]
Huang, Farong [1 ]
Du, Lei [1 ]
机构
[1] E China Univ Sci & Technol, Minist Educ, Key Lab Ultrafine Mat, Sch Mat Sci & Engn, Shanghai 200237, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 477卷 / 1-2期
关键词
MTEOS; aluminum phosphate; hybrid resin; composite;
D O I
10.1016/j.msea.2007.06.006
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Homogeneous silicon-containing organic-inorganic hybrid materials and the relevant glass fiber reinforced composites were prepared by hydrolyzing different amounts of methyltriethoxysilane (MTEOS) precursor in aluminum phosphate (AP) solution. Thermal behavior of the hybrid matrix materials and mechanical properties of the composites showed that the matrixes had excellent heat resistance with a weight loss of only 2.65% after being sintered at 1000 degrees C for 30 min in air, and the mechanical property of the composites was so markedly enhanced that the flexural strength raised from the 45MPa when contained 0 wt% MTEOS to the maximum value of 116MPa when contained 5 wt% MTEOS. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:96 / 99
页数:4
相关论文
共 50 条
  • [1] Electrochromic properties of organic-inorganic composite materials
    Liu, Weishi
    Zhang, Xiaoyuan
    Liu, Jianqiang
    Ma, Xiaodan
    Zeng, Jinming
    Liu, Ping
    Xu, Tiangui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 718 : 379 - 385
  • [2] Synthesis and Mechanical Properties of Organic-Inorganic Hybrid Materials from Lignin and Polysiloxanes
    Lippach, Andreas K. W.
    Kraemer, Ramona
    Hansen, Michael R.
    Roos, Stephan
    Stoewe, Klaus
    Stommel, Markus
    Wenz, Gerhard
    Maier, Wilhelm F.
    CHEMSUSCHEM, 2012, 5 (09) : 1778 - 1786
  • [3] Epoxy Resin Composite Reinforced with Carbon Fiber and Inorganic Filler: Overview on Preparation and Properties
    Rafique, Irum
    Kausar, Ayesha
    Muhammad, Bakhtiar
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2016, 55 (15) : 1653 - 1672
  • [4] Enhancement of fracture toughness of hybrid organic-inorganic polyurethane composites
    Srivastava, Alok K.
    Iyer, Divya
    Galadari, Mohammad
    Srivastava, Samanvaya
    Singh, Aparna
    POLYMER COMPOSITES, 2025,
  • [5] Synthesis, characterization, and photochromic properties of hybrid organic-inorganic materials based on molybdate, DABCO, and piperazine
    Coue, Violaine
    Dessapt, Remi
    Bujoli-Doeuff, Martine
    Evain, Michel
    Jobic, Stephane
    INORGANIC CHEMISTRY, 2007, 46 (07) : 2824 - 2835
  • [6] Preparation, properties and applications of organic-inorganic hybrid nanocomposite poly(aniline-co-o-toluidine) tungstomolybdate
    Khan, Anish
    Khan, Aftab Aslam Parwaz
    Asiri, Abdullah M.
    Gupta, Vikas
    Rathore, Mukta
    JOURNAL OF MOLECULAR LIQUIDS, 2016, 216 : 646 - 653
  • [7] Improvement of the bioactivity of organic-inorganic hybrid aerogels/wollastonite composites with TiO2
    Fernandez, J. A. Toledo
    Mendoza-Serna, R.
    Santos, A.
    Pinero, M.
    de la Rosa-Fox, N.
    Esquivias, L.
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2008, 45 (03) : 261 - 267
  • [8] Preparation and characterization of PEO based organic-inorganic hybrid gel polymers for electrochromic devices
    Liu, Wei
    Zhang, Weichao
    Shen, Fenglei
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (30)
  • [9] Development of strong and bioactive calcium phosphate cement as a light-cure organic-inorganic hybrid
    Barounian, M.
    Hesaraki, S.
    Kazemzadeh, A.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2012, 23 (07) : 1569 - 1581
  • [10] The effects of CVD SiC interphase on mechanical properties of KD-1 SiC fiber reinforced aluminum phosphate composites
    Ding, Donghai
    Zhou, Wancheng
    Luo, Fa
    Mu, Yang
    Zhu, Dongmei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 : 347 - 352